Compressor-Assisted Enviroprime System® Trash (HTC)0 pages
Compressor-Assisted Enviroprime System® Trash (HTC)
Thompson Enviroprime System® trash pumps are engineered to
provide consistent and dependable service on the most difficult
job sites. These pumps are used in a wide variety of applications
including open pumping and sewage bypassing where moderate
air handling is required. The pumps are capable of pumping
liquids with high abrasives or solids as large as 3 inches in
diameter. Enviroprime System® trash pumps are specifically
designed to prevent pumping fluid, such as sewage, from
entering the venturi and eventually onto the ground making the
Enviroprime System® environmentally friendly and safe.
Applications
Construction: Dewatering excavations, canals and
sumps, bypassing sewers and bodies of water, ground
water dewatering, water supply from wells or canals,
hosing down concrete casings, extended sumping |
Civil Engineering: Sewage pumping, flood drainage, fire
fighting, recovery of hazardous liquids
Waste Treatment: Sewer bypasses, mud or solids in
suspension, dosing neutralizing liquids, pumping out
settled sludge
Mining: Wash-down operations, tailings, high head/high
volume applications
Agricultural: Surface irrigation, liquid manure
oxygenation, transfer and spraying fertilizers or manure
Industrial: Transfer of clean or dirty liquids, mud or
solids in suspension, low viscosity petroleum products
Alternate pump end materials available for corrosive liquids
ENVIRCTRIME
system*
Features
All the features of the HT Series including...
• Positive/Flooded suction head capability
• Heavy-duty cast iron construction for
long life
• 2 or 3-vane ductile iron impellers available
• Cast iron rubber-lined, abrasion-resistant
wear plate
• Simple, low-cost maintenance
• Available as diesel, electric, or alternative
fuel driven
With the added features of:
• Compressor assisted automatic dry-priming
with initial priming and re-priming
• Utilizing the Thompson Pump
exclusive Enviroprime System® which
prevents pumpage leakage during
priming, unlike other compressor
assisted models on the market
• Able to operate during snore conditions
Bypass System Accessories Available
Model Specifications
Unit
Model
Size
(In.)
Maximum
Capacity
(GPM)
Maximum Maximum
Head Solids
(Ft.) (In.)
4 HTC 4 650 127 2.00
6 HTC 6 1,500 102 3.00
8 HTC 8 2,600 168 3.00
Consult engineering data for exact maximum performance RPM
180
160
140
120
100
80
60
40
20
0
4HTC | 6HTC | >8HTC |
1000 1500 2000
Capacity - USGPM
* Thompson Pump and Manufacturing Co, Inc.
THOMPSON Nationwide 800-767-7310
PUMP International 001-386-767-7310
EXPERIENCE INNOVATION WWW.thompSOnpUmp.COm
"