t055 TPIR Global Solar Radiation Transducer0 pages
t055 TPIR
Tutte le informazioni contenute in questo documento sono quelle attuali al momento della stampa, Siap+Micros S.r.l. si riserva il diritto di cambiarle senza alcun preavviso.
All the information content in this document are the current available at the printing phase. Siap+Micros reserve the rights to change the specifications without any advance notice.
Trasduttore di Radiazione Solare Globale
Global Solar Radiation Transducer
Principio di Misura: lo strumento è costituito da un
trasduttore che si riscalda proporzionalmente alla
radiazione solare incidente, assorbita da una speciale
vernice nera che ricopre la superficie del termoelemento di
misura. Una doppia cupola realizzata in vetro ottico
speciale (Schott K5), ottimizza le caratteristiche di misura
nelle varie condizioni ambientali.
Sensori Intelligenti: il trasduttore appartiene alla famiglia
dei sensori intelligenti in quanto dotato di micro-processore
interno che esegue tra altre funzioni di: controllo del
corretto funzionamento, pre-elaborazione dei dati,
conversione A/D dei segnali elettrici ecc. Queste
caratteristiche garantiscono eccellente accuratezza,
elevata affidabilità dei dati.
Certificato di Calibrazione: Il sensore può essere
corredato di certificato di calibrazione Siap+Micros oppure
da certificati rilasciati da altri laboratori esterni (SIT,
Colonnetti, ecc.).
Materiali e norme Internazionali: Il corpo del sensore è
in lega di alluminio anticorrosione e viterie in acciaio inox,
lo schermo di protezione è realizzato in materiale plastico
non igroscopico, UV resistente e a bassa capacità termica
e in modo di garantire una stabilità nel tempo.
Il
trasduttore è conforme a quanto previsto nella normative
Europea su EMC, è protetto contro le sovratensioni e
risponde
pienamente
alle
prescrizioni
dell’OMM
(Organizzazione Meteorologica Mondiale).
Codici d’ordine
Ordering codes
Descrizione
Codice / Code
Description
Trasduttore con uscita in corrente 4÷20 mA
t055a TPIR-I
Transducer with current output 4÷20mA
Trasduttore con uscita in tensione 0÷2 Vdc
t055b TPIR-V
Transducer with voltage output 0÷2 Vdc
Trasduttore con uscita in seriale RS485
t055c TPIR-S
Trasduttore con uscite 4÷20 mA, 0÷2 Vdc e RS485
Per ordini o contatti commerciali
t055 TPIR.doc (v.04)
venerdì 2 marzo 2012
Measure principle: the transducer is based on
thermoelements that heats proportionally to the global
solar radiation, an special “black body” paint that cover
the thermoelements surface
absorbs the incident
radiation. Two optical glass (Schott K5) domes guarantee
the measurement characteristics in all environmental
conditions.
Intelligent sensor: the transducer belongs to the
intelligent sensor family as based on a micro-processor
chip that execute among other functions: the correct
control functioning, data pre-processing, electrical signal
A/D conversion etc. This characteristics warranty excellent
accuracy, long-term stability and high data reliability.
Laboratory calibration: The sensor can be supplied with
a SIAP+MICROS calibration certificate or with calibration
certificates issues by
external primary metrological
services (SIT, Colonetti, ecc).
Housing materials and International standards: The
transducer body is made of anodized aluminum corrosionproofing with stainless steel screws, the protection shield is
made on a plastic non-hygroscopic and UV stabilized
material with low thermal characteristics that assure longterm stability. The transducer complies with CE EMC
standards, it’s protected against over tensions and is fully
compliant within the WMO (World Meteorological
Organization) standards.
t055d TPIR-IVS
Transducer with RS485 serial output
Transducer with 4÷20mA, 0÷2 Vdc , RS485 output
e-mail: sales@siapmicros.com
For further inquires or quotations
"