SL160 Autoclave chamber/load probe0 pages

Product Data Information

Specialists in Temperature Engineering

Autoclave Chamber/Load Probe

This assembly is similar to the SL150, but differs in having a chisel point to -7 allow penetration of the product bottle seal. The 90° bend in the probe also

enables the orientation of the product bottle to remain undisturbed.

The PTFE insulated sensor leads are encased in a thick walled, extruded silicone jacket, which resists the effects of high temperature steam when used with steam

autoclaves or the pure water of a water cycle system.

Sheath

: 3.0mm OD (min) x 150mm long (min) in 316 stainless steel.

Detector : single or duplex PT100 with 3 or 4 wire connection, Class 'A' or

fractional DIN tolerance and to BS EN 60751:1996.

Flying lead : PTFE insulated copper conductors, 7/0.16mm to ASTM-B-298

with a 250V RMS rating and encased in a thick walled, silicone rubber jacket, overall length of 3000mm.

Operating range : -50 to +150°C.

: single or duplex element, type 'T' (Cu/Con) in class 1 material to BS EN 60584-1:1996.

: PTFE insulated conductors, 7/0.2mm, with a thick walled silicone rubber jacket, overall length of 3000mm.

Element

Product code : SL160

Lead wire

Operating range : - 50 to +150°C.

For an effective and leak free chamber entry, sealing glands utilising soft sealant technology are recommended. For further information please contact

our Sales Department.

©2004 Thermal Detection Ltd.

\ Thermal Detection Limited O Tel +44 (0)1642 50287«

Unit 6, Orde Wngate Way Fax +44 (0)1642 61S307

Primrose Hill industrial Estate Email tdJ©thermal-detection.com

Stockton-on-Tees England TS19 0GA Web$rte www.thermal-detection.com