Dynamometers0 pages

Force Gauges
Mechanical hand dynamometer M1191
The force transmission of the device is connected to counter-mounted high-precision measuring
springs. The change of displacement is detected
by a precision micrometre dial and is scaled proportionally to the force in Newton, alternatively in
kg or lbs. An integrated trailing pointer serves to
display the peak values.
Scope of delivery
Force transmission accessories: Compression
piece, extension, drawbar | Factory calibration
certicate | Operating instructions | Carrying case

Available force measuring ranges
50, 100, 200, 500 N
Technical Data
• Measurement uncertainty: ≤ ± 1 % full scale
• Resolution: 100 mark lines
• Display: Dial gauge Ø 50 mm
• Aluminium housing in RAL5010 with
2 M6 mounting holes on each front side
for exible installation
• Dimensions H×W×D: (180 × 76 × 38) mm
• Weight: ~ 800 g

Hand dynamometer K326

Force Gauges

The base starter model with digital peak value
memory. Power is supplied by standard AA NiMH
batteries that can be recharged via a mini-USB
2.0 interface.

4

Scope of delivery
Force transmission accessories: Compression
piece, extension, hook (up to 1000 N) | CD with
manuals | 230V/50Hz charger | 3 NiMH batteries
| Certicate of factory calibration | Operating manual | Carrying case
Available force measuring ranges
20, 50, 100, 200, 500, 1000, 2000, 5000 N

Technical Data
• Measurement uncertainty: ≤ ± 0.1 % full scale
• 32-bit RISC microprocessor
• A / D converter: 16-bit
• Measuring frequency: 1000 Hz
• Backlit LCD display: 5 digits + point
• Die-cast aluminium housing in RAL7035 with
recessed grips with 2 M6 mounting holes both
on each front side and on the backside for
exible installation
• Operating time ≥ 10 h
• Dimensions H×W×D: (170 × 75 × 35) mm
• Weight: ~ 700 g

Hand dynamometer K323
The high-performance unit with replaceable digital storage (SD memory chip) for recording of
peak values and test series in csv le format
(Excel™ compatible). Alternatively, continuous
data (ASCII) transfer is possible via USB 2.0.
Furthermore, force limits can be congured as
switch-off criteria, optionally also stroke limits in
connection with displacement signal, e.g. by TesT
testing devices. Power is supplied by commercially available AA NiMH batteries.
Scope of delivery
Force transmission accessories: Compression
piece, extension, hook (up to 1000 N) | CD with
manuals | CD with virtual COM port driver (optionally visualization software W913) | 230V/50Hz
charger with integrated charging electronics | 3
NiMH batteries | Certicate of factory calibration |
Operating manual | Carrying case
Available force measuring range
20, 50, 100, 200, 500, 1000, 2000, 5000 N

Technical Data
• Measurement uncertainty: ≤ ± 0.05 %
• 32-bit RISC microprocessor
• A / D converter: 24-bit
• Measuring frequency: 50…2000 Hz
• Backlit graphic LCD display: 7 digits + point
• Data recording on integrated 2 GB SD
Memory Card
• Analogue output port 0...2 V DC
(optional 2-point calibration)
• 2 open collector output ports for controlling
external devices
• Optional connection of an incremental path
signal (5 V TTL)
• Die-cast aluminium housing RAL7035 with
recessed grips with 2 M6 mounting holes
both on each front side and on the backside
for exible installation
• Operating time ≥ 10 h
• Dimensions H×W×D: (170 × 75 × 35) mm
• Weight: ~ 820 g

www.test-gmbh.com
Subject to technical changes