Stripping machine FA-4060 pages
Stripping machine
FA-406
Robustly built the universal stripping machine type FA-406 is
designed for fast stripping of flexible and rigid cable ends - single core or multicore wires and cables up to 10 mm external
diameter.
Technical details :
•
•
•
•
•
Motor 110/220 V 50Hz single phase
Conforms to TÜV and CE
Manufactured in France
Weight : 10,7 Kg
Dimensions in mm : H : 220 - L : 440 - W : 230
Machine output :
• round cables ext. Ø 1 to 10 mm max.
• all types of insulations (see range of stripping blades)
• stripping length with a standard head :
2 to 10 mm with short stop
8 to 36 mm with long stop
• with the special head simultaneous stripping and twisting of wires can be
attained. Stripping length :
4 to 10 mm with short stop
8 to 36 mm with long stop
Operating:
Choice of machine :
The motor drives the stripping head with its 3
blades. Insert the wire to be stripped and press the
handle which closes the blades while turning. The
blades score the insulation and remove the slug
when withdrawing the wire.
1• direction of rotation (to the right or left)
2 directions of rotation available : according to the country.
for example :
to the left in France and Switzerland ;
to the right in Germany and UK
Adjusting is easy and very precise - in 3 steps :
- stripping diameter is obtained with a vernier
which allows permanent adjusting of the blades.
- The stripping length is determined by a graduated and adjusted scale with an external knurled
button .
- Adjust the travel of the blades by a knurled button on the top of the machine.
Closing of the blades can be operated manually or
with a foot pedal or with a pneumatic system. (see
accessories)
2• 3 machine types available according to the type and stripping length
of insulation
- FA-406 Art.-No 0553-0001 (without twister head)
standard type equipped with a standard head and a long stop
position. Stripping length from 8 to 36 mm.
- FA-406 Art.-No. 0553-0002
Special type with a long stripping and twister head and a long
stop position. Stripping length from 8 to 36 mm.
- FA-406 Art.-No. 0553-0003
Special type with a short stripping and twisting head and a short
stop position. Stripping length from 4 to 10 mm.
Standard accessories :
- Stripping head with blades in tool steel :
Note : For very hard or abrasive insulations we recommend
using blades in tungsten carbide. (see optional accessories)
- Wire guides
Note : We recommend use of wire guides to centralise the wire
for a clean and precise cut (see optional accessories)
- Manual pedal system
Note : Pneumatic pedal system available
(see optional accessories)