Model SAE ISOLOK® Data Sheet 18.1.160 pages
ISOLOK SERIES SAE
Bulk Solids Sampler
Large Capacity Sampler
Handles Large Diameter Particles
ISOLOK® series SAE Sampler
®
Features
Description
t Collects samples from slide or vertical drop chutes
or direct from open processes
ISOLOK® Series SAE Large Capacity Sampler captures
a volume of approximately 100 cc per cycle. Particle
sizes up to 3/4" (19 mm) are accommodated without
shearing or degrading the sampled material. An
auxiliary top body port enables air ejection of non-free
flowing materials.
t Single moving part collects accurate and
repeatable 100 cc sample volume
t Particle sizes up to 3/4" (19 mm) are accommodated
without shearing or degrading sample material
t Heav y 316 stainless steel construction features
chrome-hardened body bore
t Field-replaceable, application-specific seals include
EPDM, polyurethane elastomers and more
t Extended body with 4" (10 cm) plunger stroke
allows for sampling well inside heav y‑body/doublewall vessels
t Heav y-duty 3" (7.6 cm) clamp ferrule & smoothbore mounting port for easy installation
t ATEX compliant
An air cylinder extends a single plunger into the
process material, then immediately withdraws, carrying
a fixed amount of sample trapped in an annular ring
between plunger seals. Process or flow ports are
always closed, preventing leaks or product loss. There
are no tubes or passages to become clogged. The
gravity-discharged sample is transferred directly to a
closed container. Sample integrity is maintained while
contamination of personnel or facility is eliminated.
ISOLOK® Series SAE Samplers can be used for
composite, batch or analysis sampling techniques.
Composite sampling is accomplished by obtaining
a series of precisely measured material samples at
set intervals or adjusted in response to product flow.
Samples can be collected in common or individual
containers. Batch or analysis sampling in response to
immediate need or on-line process control interface
is facilitated using single or rapid-cycling material
withdrawal.
A complete line of programmable automatic controls
is available for use in general purpose as well as
hazardous environments.
www.sentry-equip.com
18.1.16 Rev. 5 02/14
"