Tekna EVO ATL series0 pages

DOSING PUMP

Tekna EVO ATL SERIES - Solenoid dosing pump

Technical characteristics
Flow rates: from 2 to 54 l/h
Max back pressure: up to 20 bar
Power supply:
100÷240V 50/60 Hz
Stroke rate: from 120 to 300 strokes/minute
Pump head:
PVDF
Diaphragm: PTFE
External Enclosure: PP reinforced with fiber glass
protection degree IP65
Manually priming valve
Installation kit: Included

Seko Tekna EVO ATL Series is an analogic dosing pump with:
Constant flow rate manually adjustable

Timed dosage with Ton-Toff with double regulation

Proportional flow rate according to an external digital signal (water meter)
Three regulation knobs:
o Flow rate percentage
o Ton regulation
o Toff regulation
Only with 4 sizes, is possible to cover a wide range of performances, having a flow rate range from 2 to 54 l/h and a back
pressure from 0.1 to 20 bar. The power supply is 100÷240 Vac – 50/60 Hz therefore the same pump can operate with different
supply voltage.
The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end but is available in PVC as
well, on request.
Tekna ATL 400 is available in standard version and Air Cond version, which is equipped with mist emitter instead of injection
fitting, for dosing fragrances.
All Tekna series are equipped with a manually priming pump for the start up.
The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction
tube, PE delivery tube. Moreover is available an installation kit in PVC, on request.

1 of 4

Technical data can be changed without notice.
TD_Tekna EVO_ATL_Series_rev.0.1