ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت Steed Machinery Co., Ltd. در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
-
Function:
flow-control
-
Media:
for fluids
-
Number of channels:
4/2-way
-
Operation:
electro-hydraulic
-
Other characteristics:
proportional
In order to ensure stable control, loosen the air vent and bleed air from the valve before starting operation. For details, see the userÂ’s guide.
2. T Port Piping
When configuring piping, ensure that the T port is filled with operational fluid.
3. Manual Adjusting Screw
For the initial adjustment or when there is no input current to the valve due to an electrical problem or some other reason, the valve can be operated and valve pressure can be increased by rotating the manual adjustment screw clockwise (rightward). Normally, the manual adjusting screw should be rotated back fully to the left (counterclockwise).
4. Valve Mounting Orientation
Install the valve so the spool axis line is horizontal.
5. Combining with a Pressure Compensation Valve
Use of the optional pressure compensation kit is recommended when higher precision flow rate control is required or in high-pressure applications.
6. If pilot pressure exceeds 92 kgf/cm2 (9 Mpa) use a modular type P port reduction valve (MBRV-02-P-1) at a setting of 20 kgf/cm2 (2 Mpa).
7. On a system that requires large brake pressure during deceleration or a system that uses a vertical cylinder, equip a counter balance valve. Use a single rod, if the rod exit is not slowed sufficiently, use a counter balance valve on the rod.
8. Maintain hydraulic operational fluid contamination so it is at least Class 9.
9. Bundled Accessories (Valve Mounting Bolts)
M5 L45......4pcs
10. Use an operational fluid that conforms to the both of the following
Oil temperature: -20 to 70°C. Viscosity: 12 to 400 mm2/s.
The recommended viscosity range is 15 to 60 mm2/s.