Linear Roller System with MR rail and R, R.T, R.S sliders0 pages
LINEAR RAIL RANGE
Linear Roller System
with MR rail and R, R.T, R.S sliders
The MR Series Linear Rail System consists of a C-section steel rail with internal convex
raceways, where robust double row ball bearing rollers travel. The high precision rollers
are lubricated for life and protected with 2RS seals. Sliders are available with three or
five rollers, including eccentrics to adjust the bearing preload. Both ends of the sliders
are equipped with polyamide wipers to remove debris from the raceway and grease impregnated felt wipers to lubricate the raceways for long life with minimal maintenance.
The MR rail system is especially equiped for harsh environments where contamination is
a problem. Most bearing systems utilize a groove that a roller or ball travel within. These
grooves capture and hold debris that eventually cause the bearing to fail. The convex
raceway of the MR Series provides a place for debris and other contaminates to be
pushed aside by the rollers. This feature enables the MR Series to function in environments where other bearings quickly fail.
Sliders Series: RV, RP, RA
Sliders series R.
18
28
43
24
37
Sliders Series: RVT, RAT, RPT,
RFT
45
Sliders series R.T
28
43
R.T Sliders Series are made of zinc
plated steel with mounting holes perpendicular to the roller axis and parallel
with the direction of preferred loading.
The sliders have sealed rollers and
axial wipers for protection of the internal parts. The R.T Series Sliders are
available in 2 sizes and with either 3 or
5 rollers
16,5
30
R Sliders Series are made of zinc plated
steel with mounting holes parallel to
the roller axis and perpendicular to
the direction of preferred loading.The
sliders have sealed rollers, axial wipers, and longitudinal seals for optimal
protection of the internal parts and a
sealing strip to prevent accidental tampering of the fixed rollers.
The R Series Sliders are available in 3
sizes and with either 3 or 5 rollers.
10
15
24,3
37,2
Sliders Series: RVS, RAS, RPS,
RFS
8
Sliders series R.S
18
28
43
The R.S Sliders Series have a very slim
body to obtain the most compact
slider possible, without sacrificing performance. They also offer both threaded and through hole mounting options.
The standard slider body is made from
zinc plated steel but is also available
in all Stainless Steel construction for
higher corrosion resistance.
The R.S Series Sliders are available in 2
sizes, 2 materials, and with either 3, 4 or
5 rollers.
28,20
18,30
14,8
"