Insulation support DHK0 pages
The cost-effective plastic insulation support for all
conventional insulating boards
Insulation fixings
Insulation support DHK
BUILDING MATERIALS
▪ Concrete
▪ Hollow block made from lightweight
concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Solid sand-lime brick
▪ Natural stone with dense structure
▪ Aerated concrete
▪ Solid block made from lightweight
concrete
▪ Solid brick
ADVANTAGES
APPLICATIONS
FUNCTIONING
▪ The optimised geometry of the
expansion section ensures a low
anchorage depth and reduces the
amount of drilling required.
▪ Flexible pins in the plate area adapt
to the insulating material, and
ensure a sustained contact pressure.
▪ The simple hammerset installation
allows for a quick installation
process and thus reduces workload.
▪ The colouring of the DHK 90 means
that it does not stand out on black
clad insulating material in rearventilated façades.
▪ The DHK 45 is suitable for use in
pressure-resistant insulating boards
and reveals.
To fix soft and pressure-resistant
insulating materials in rearventilated façades, such as:
▪ Mineral / glass wool
▪ PU panels
▪ Light building boards made of wood
wool
▪ Cork boards / coir matting
▪ Polystyrene
▪ Foam glass boards
▪ The DHK is set in push-through
installation using a hammer.
▪ The plate size of the insulation
support is to be selected in line with
the compressive strength of the
insulating material: DHK 45 for
pressure-resistant; DHK 90 for soft
insulating materials.
▪ The expansion of the ribs in the drill
hole gives the DHK an ideal contact
pressure.
▪ Temperature range when installed: 40°C to +80°C.
http://www.fischerwerke.de/en/ - 16/07/2012
1