PO Shaft Rings0 pages

نسخه متنی

Radially Assembled, External Poodle

nnnn

PO/POL Shaft Rings

nnnn

The PO ring features wide "ears" (resembling those of a

nnnn

poodle dog, thus the name) which offer extra retention

nnnn

surface against the retained part. PO rings also come

nnnn

in thinner sizes as a standard series of rings known as POL.

nnnn

Free Diameter & Ring Measurements Shaft Diameter & Clearance Diameter

nnnn

With Section B-B Groove Dimensions Installed In Groove

nnnn

RING NO.	SHAFT DIAMETER			GROOVE SIZE						RING SIZE & WEIGHT					CLR. DIA.	i THRUST LD. (lbs.) Sqr. Corner Abutment
				DIAMETER			WIDTH		DEPTH	FREE DIAMETER		THICKNESS***		Weigh! Per 1000 Pes.	In- stalled In groove	i THRUST LD. (lbs.) Sqr. Corner Abutment
																Ring Safety factor of 21/2	Groove Safety factor of 2
	Ds DEC	Ds FRACT	Ds mm													Ring Safety factor of 21/2	Groove Safety factor of 2
	Ds DEC	Ds FRACT	Ds mm	Dg	Tol.	F.I.M*	W	Tol.	d ref.	Df	Tol.	T	Tol.	lbs.	L2	Pr	Pg
PO-15	.156	5/32	4.0	.120	±.004	.002	.039	+ .006	.018	.110	±.003	.035	±.002	.42	.39	457	110
PD-18	.188	3/16	4.8	.148	±.005	.002	.039		.020	.140		.035		.63	.42	609	130
PO-25	.250	1/4	6.4	.210	±.006	.003	.039		.020	.188		.035		.84	.52	914	200
PO-31	.312	5/16	7.9	.272		.003	.046		.020	.250		.042		1.46	.63	1320	250
PO-37	.375	3/8	9.5	.331		.003	.046		022	.312	±004	.042		1.92	.72	1573	300
PO-43	.433	7/16	11.1	390	±.008	.003	.056		.024	.375		.050		2.66	.79	2233	400
PO-50	.500	1/2	12.7	.440		.004	.056		.030	.406		.050		3.30	.89	2538	600
PO-62	.625	5/8	15.9	.531		.004	.056		.047	.500	±.005	.050		4.65	1.03	3045	1100
PD-75	.750	3/4	19.0	.632	±.010	.004	.058	+ .008	.059	.594	±.005	.062	±.003	5.35	1.17	4659	1600
PO-100	1.000	1	25.4	.860		.004	.086		.070	.812	±.006	.078		1265	1.51	7613	2600
PO-125	1.250	1 -1/4	31.8	1.09O		.006	.103		.080	1.032	±.006	.093		25 20	1.90	11165	3500
PO-150	1.500	1 -1/2	38.1	1.317	±015	.008	.120	+ .010	.091	1.250	±.008	.109		36.3	2.18	15530	4800
PO 1 75	1.750	1-3/4	44.4	1.480		.010	.139		.135	1.406	±.010	.125	±.004	53.0	2.45	20808	820O
PO-200	2.000	2	50.8	1.730		.012	.139		.135	1.625	±.015	.125	±.004	59.2	2.83	23853	9450
POL-15	.156	5/32	4.0	.120	±.004	.002	.029	+ .006	.018	.110	±.003	.025	±.002	.30	.39	325	110
POL-1B	.188	3/16	4.8	.148	±.005	.002	.029		.020	.140		.025		.45	.42	436	130
POL-25	.250	1/4	6.4	.210	±.006	.003	.029		.020	.188		.025		.60	.52	650	200
POL-31	.312	5/16	7.9	.272		.003	.029		.020	.250		.025		.87	.63	792	250
POL-37	.375	3/8	9.5	.331		.003	.039		.022	.312	±.004	.035		1.60	.72	1320	300
POL-43	.438	7/16	11.1	.390	±.00B	.003	.039		.024	.375		.035		1.86	.79	1878	400
POL-50	.500	1/2	12.7	.440		.004	.046		.030	.406		.042		2.77	.89	2132	600
POL-62	.625	5/3	15.9	.531		.004	.046		.047	.500	±005	.042		3.65	1.03	2538	1100
POL-75	.750	3/4	19.0	.632	±.010	.004	.056	+ .008	.059	.594	±005	.050		5.35	1.17	3756	1600
POL-10Q	1.000	1	25.4	.860	±.010	.004	.056	+ .008	.070	.812	±.006	.050		8.60	1.51	4872	2600

nnnn

*F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.

nnnn

I BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD

nnnn

AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.

nnnn

***FOR PLATED RINGS, ADD ,002" TD THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002"

nnnn

LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM.

nnnn

NOTE: THIS GROUP CONTAINS ALTERNATE THICKNESS VALUES (COLUMN "T"). OTHER PARAMETERS SUCH AS WIDTH OF GROOVE ("W")

nnnn

AND THRUST LOAD "Pr" ALSO DIFFER FROM STANDARD VERSIONS. PLEASE TAKE THIS INTO CONSIDERATION WHEN SELECTING A PO RING FOR YOUR DESIGN.

nnnn

For the most up-to-date specifications, online ordering, quotations & sample orders, visit www.rotorclip.com

اطلاعات تماس

PO Shaft Rings0 pages

تمام کاتالوگها و بروشورهای فنی شرکت Rotor Clip Company

IRAN INDUSTRY EXPO

خدمات بازرگانی