Flat clamps B1.82310 pages

Ausgabe 6-14 E

B 1.8231
Flat Clamp
with optional position monitoring,
double acting, max. operating pressure 500 bar

Unclamping

Clamping

Application
The flat clamp is a compact and flat clamping
element with large clamping stroke.
This clamp is designed for clamping of flat
workpieces in fixtures on machine tools or
for welding applications. It is well protected
against coolants and swarf and resistant to
welding spatter.

Advantages
Important notes
NN flat and compact design
For metal-cutting and vertical mounting
position (clamping lever upwards) it is
NN high protection against swarf and welding
recommended to remove the cover plate.
spatter
Operating conditions, tolerances and other
NN large clamping stroke
data see data sheet A 0.100.
NN clamping lever is completely retracted in
unclamped mode
NN transverse forces at the clamping point are
compensated
Description
NN reduced maintenance
The flat clamp is a double-acting hydraulic NN Position monitoring, optional
clamping element where the piston acts via a
con-rod onto a clamping lever. In unclamped
position, the clamping lever is completely
r
­etracted and the workpieces can easily be inserted from above. A clamping recess which Application example with inductive position monitoring
is larger than the clamping lever is sufficient as
clamping point.
The element compensates transverse forces
at the clamping point. The clamping forces
are introduced vertically to the base at the
c
­ lamping height „h3“, therefore introducing no
a
­ dditional turning moments.

Römheld GmbH · Postfach 1253 · 35317 Laubach, Germany · Tel.: +49 (0) 6405 / 89-0 · Fax: +49 (0) 6405 / 89-211

Actual issue see www.roemheld.com
Subject to modifications