Hot-Melt Guns Series NEW LIFE0 pages
HOT-MELT GUNS
NEW LIFE SERIES
NEW LIFE series glue guns are built with standard or high-temperature configurations, with one or more modules with different types of centre
diameters and nozzles, and with one or more solenoid valves, in order to satisfy the widest range of different requirements. NEW LIFE’s main
features are: speeds up to 6.000 cycles/minute, AMX 45 module with double interchangeable gasket cartridge, Zero-Cavity self-cleaning nozzle,
protective non-stick casing coating, integrated glue filter which is removable without disassembling the hose. This wide, complete range of
different models makes it possible for even most demanding Customer to find the best solutions for any gluing needs.
SOLENOID VALVES
In addition to standard solenoid valves, Preo has developed a
new model that is ranked at the top of the market offer.
Depending on the required applications, this valve can deliver
the highest level solution for tasks that require low energy
consumption, high-speed application, small size and weight.
GUN CASING
The casing is built in "Ergal”, an aluminium alloy that considerably improves the
product’s resistance to mechanical stress. The hard oxide cover makes gun
cleaning and maintenance quick and easy.
ELECTRICAL CONNECTIONS
Removing the electrical kit is easy, simple and safe.
THERMAL-HEATING
The gun is heated with highly reliable heating coils controlled by
extremely precise sensors.
AMX 45 MODULE
All guns are equipped with a new AMX 45 Series module that
ensures precise, regulated glue application. This level of
performance was possible only because of the special attention
dedicated during the design and construction phases.
The most important aspect of the AMX 45 module is its
innovative gasket system with the double interchangeable
cartridge, which guarantees a perfect seal at high pressures
and temperatures in addition to simple, inexpensive, and longlasting maintenance.
NOZZLE
The gun is supplied with stainless steel Zero-Cavity selfcleaning nozzles, available with a minimum diameter of 0.25
mm to a maximum of 1.2 mm. Zero-Cavity is the term used for
the cut-off that directly closes the nozzle hole, eliminating any
possible impurities and guaranteeing the constant cleanliness
of the nozzle. This guarantees that the system always works
properly. The wide range of nozzles includes a number of
configurations and special designs, based on the Customer’s
needs. Preo nozzles stand apart from the competition due to
their basic technical features, which can be summarized as
follows. First: the nozzles are made of durable materials with
the highest level of resistance to wear and tear. Second: their
thermal conductivity is much greater than the traditional steel,
with the advantage of quick heat transmission, at least 8 times
higher than normal. Third: concerns the construction geometry,
due the fact that multi-way nozzles ensure the same reliability
as the traditional Zero Cavity nozzles.
GLUE FILTER
This guarantees better distribution of the glue and prevents
nozzles from clogging due to the presence of impurities in the
glue. The filter is integrated into the casing, and is easily
accessible and can be quickly replaced without disassembling
the hose.