PUDA,vacuum packing machine,DCS-FZK,chemical and industrial0 pages
DCS-FCQ Series: Air Packer for Valve Bag
DCS-FZK Series: Vacuum Packer for Valve Bag
Product Description:
Product Description:
This series of packers are designed to fill valve bags with a range of dry granular, pelleted, powdered material
or the mixture of them. Fast packing speed and high accuracy are two of the many advantages.
This type of machine is designed to package extremely light and
They are ideal for a wide range of products such as Barite, Silicon Sand, Calcined Flint Clay, Active Carbon,
fine powders with low bulk density and high air content. The
Refractory Materials, Dry Mortar, etc.
vacuum chamber and the bulk/trim flow system draw the product
into the bag at uniform rates, providing excellent filling accuracy,
tight package, and non-dusty environment.
Applicable materials include Silica Powder, Carbon Black, White
Carbon Black, Superconducting Carbon Black, Active Carbon in
Powder, Stearate, Graphite, etc.
Technical Parameters:
•Weighing Range: 10-50 kg
•Packing Rate: 1-4 bags/minute
(packing speed depends on the material's
features and package material)
•Weighing Accuracy: ±0.20.4
•Applicable Voltage: AC220V-440V 50/60Hz
Three Phases and Four Lines
(clients should supply the voltage class and
Working Principle:
frequency at their local place)
DCS-FCQ series packing machines use pressed air to
•Air Source Requirement: 0.4-0.8 MPa Dry Compressed Air,Total Air Consumption: 0.4m³/min
feed material into bags. Low pressure air is used to
•Applicable Environment: Altitude ≤ 2000meters, Humidity ≤ 95% RH Non-congealable Dew,
condition the product (by fluidizing, wind conveying, or
Operating Temperature: 0℃50℃, Storage Temperature : -20℃70℃
by combining both methods) and provide differential
pressure necessary to move the product from the
hopper to the bag. The quantity of the air is controlled
through a valve on top of the enclosed hopper. When
Working Principle:
target value reached, the valve at the sprout closes and
This series of packers has vacuum chamber which connected with negative
stops the feeding. The filled bag is ready to be moved
pressed air source to help the feeding device to move material into bags.
from bag holder and the machine is prepared for a new
Material is fed into the surge bin from where the bulk/trim filling system
circle.
move the material from, at the same time, the negative pressure from the
vacuum chamber helps to “drag” the product into the bag that placed in the
Technical Parameters:
•Weighing Range: 10-50 kg
•Packing Rate: 3-8 bags/minute
(packing speed depends on the material's features and package material)
•Weighing Accuracy: ±0.2-0.6
•Applicable Voltage: AC220V-440V 50/60Hz Three Phases and Four Lines
(clients should supply the voltage class and frequency at their local place)
•Air Source Requirement: 0.4-0.8 MPa Dry Compressed Air,
Total Air Consumption: 0.4m³/min
•Applicable Environment: Altitude ≤ 2000meters, Humidity ≤ 95% RH Non-congealable
Dew, Operating Temperature: 0℃50℃, Storage Temperature : -20℃70℃
03
vacuum chamber. When reaching the pre-set weight value, filling device
and vacuum source is stopped, the vacuum chamber’s gate opens and the
filled bag could be taken off manually or automatically.
Specification and Model
Weighing
Range
Packing Rate
Accuracy
Power
Reference
Weight
Reference Size
L×W×H(m)
Proper
Application
DCS-FZKC
Vacuum
10-50kg
1-3
bags/minute
±0.2-0.4%
4.5kw
800kg
1.7×1.3×1.9
Bulk Density
≤0.3t/m3
DCS-FZKJ
Vacuum and Screw
10-50kg
1-3
bags/minute
±0.2-0.4%
6.5kw
900kg
1.7×1.2×2.2
Bulk Density
≤0.7t/m3
10-50kg
2-4
bags/minute
±0.2-0.4%
8.5kw
950kg
1.7×1.2×2.3
Bulk Density
≤0.7t/m3
10-50 kg
2-4
bags/minute
±0.2-0.4%
6.0kw
950kg
1.7×1.2×2.2
Powdery
Materials
with Granule
Model
DCS-FZKY
Vacuum and
Impeller
DCS-FZKQ
Vacuum and Air
forced
04
"