lateral high pressure valves ECD-H 100 pages

نسخه متنی

data sheet E7.07-01/2008

www.co-ax.com

lateral valve type ECD-H 10

2/2 way valve pressure range orifice connection function

direct acting

PN 0-200 bar DN 10 mm thread valve

normally closed symbol

valve

normally open symbol

design body materials

pressure balanced, with spring return

®©

synthetic resin on metal

NBR_PTFE, FPM, CR, EPDM

Above stated body materials refer to the valve port connections that get in contact with the media only!

valve seat seal materials

general specifications

options

ECD-H threads G 3/8
NC	NO
bar 0-200	0-150
m3/h 1,5
leak rate	< 10-6 mbar-l-s-1
Pi» P2
P2 > Pi

details needed

■ orifice

■ port

■ function NC/NO

■ operating pressure

■ flow rate

■ media

■ media temperature

■ ambient temperature

■ nominal voltage

function

pressure range bar

vacuum pressure-vacuum back pressure media

abrasive media damping

flow direction switching cycles switching time media temperature

ambient temperature

limit switches manual override approvals mounting weight

additional equipment

gaseous - liquid

opening
closing
A => B as marked	bi-directional upon request
1/min 100
ms opening 250 closing 110
°C DC: -20 to +100	-20 to +160
AC: -20 to +100	-20 to +160
°C DC: -20 to +60
AC: -20 to +60
nductive

electrical specifications Un 24 V DC	options special voltage upon request
Un 230 V 40-60 Hz AC	special voltage upon request
DC direct-current magnet
AC direct-current magnet with integrated rectifier	above 100°C with separate rectifier

nominal voltage

actuation

\ The valves' technical design is based on media and application requirements. This can lead to deviations from the general specifications shown on the data sheet with regards to the design, sealing materials and characteristics.

insulation rating protection energized duty rating connection

IP65
ED 100%
plug acc. DIN EN 175301-803 form A, 4 positions x 90° / wire diameter 6-8 mm	terminal box M16x1,5

If order or application specifications are incomplete or imprecise there exists a risk of an incorrect technical design of the valve for the required application. As a consequence, the physical and / or chemical properties of the materials or seals used, may not be suiͭtable for the intended application.

optional additional equipment current consumption N-coil

illuminated plug with varistor

H-coil

24 V_DC 2,64 A

230 V 40-60 Hz AC 0,30 A

explosion proof

nductive (I)	normally open-PNP
nductive (B	normally open-PNP

limit switches

■ specifications not highlighted are standard specifications highlighted in grey are optional

mller co-ax ag Gottfried-M야ller-Str. 1 D-74670 Forchtenberg Օ Germany fon +49(0)7947/828-0 Օ fax +49(0)7947/828-11 Email info@co-ax.com

درباره سازنده

اطلاعات تماس

lateral high pressure valves ECD-H 100 pages

تمام کاتالوگها و بروشورهای فنی شرکت mÃ¼ller co-ax ag

IRAN INDUSTRY EXPO

خدمات بازرگانی