Coolant Inducer0 pages

BT40-HDC16A-135CS
BT40-CDC16-135
Collet Chuck Type Coolant Supply
8,000rpm
870psi
R.P.M.
Cutter with oil hole
FDC-OH type
L
Completely sealed
by short slotting
No damage to ball bearings
from coolant leakage
8,000rpm
870psi
R.P.M.
Cutter without oil hole
FDC-C type
L
Effective coolant flow thru
2 coolant nozzles (grooves)
Specifications
Actual example at our user's
Type MAX RPM MAX Coolant Weight lbs
HDC07Type 8000
CT16Type 6000
290psi
CT-CS 290psi
Old type
New type
Holder
Cutting conditions Service life (Length of use)
Seizure of bearings
Bearings will not seize.
Change of seal units
Revolutions
2,000rpm 145psi
Coolant pressure
Replaceable seal unit: The seal unit can be replaced
easily for quick and low-cost maintenance of the holder.
Seal
Seal sleeve
Seal unit
NT’s fluid heads deliver coolant right to the tool tip on machines without coolant through
the spindle capabilities to flush out chips and improve cutting performance.
Delivers coolant right to the tool tip on machines without coolant through the spindle capabilities.
Flushes out chips and improves cutting performance.
Coolant at the tool tip extends tool life. Prevents tool breakage and flushes out troublesome heat
and chips.
NT uses multi-seal construction, sealed high speed roller bearings, and a tough corrosion resistant
surface treatment for precise trouble-free operation and long life.
Collet chuck Type Milling chuck Type CT-CS