TimeProvider 1000 and 11000 pages
TELECOM SOLUTIONS
TimeProvider 1000/1100
Network Access Synchronization
INTRODUCTION
The proliferation of high-speed data, broadband multimedia and circuit-to-packet convergence is rapidly driving the need for high quality synchronization outside the network core into metro and access. However, the synchronization economics and functional requirements of access nodes differ significantly from traditional core nodes. A reduced number of outputs, smaller footprint and lower cost points, while maintaining the PRS accuracy and SSU/BITS performance of a core office synchronization system, are still critical requirements for a small office synchronization solution. Symmetricom’s TimeProvider™ is ideally suited to meet this need.
TimeProvider’s innovative architecture combines the tasks of tracking incoming timing references, qualifying the signals, filtering and distributing precise synchronization onto a single universal Input, Output and Clock card (IOC). Available in Rubidium or Quartz, a second IOC card can be added to provide full input, clock redundancy and output protection. Local and remote provisioning and management of the TimeProvider is performed through the Information Management Card (IMC).
THE TIMEPROVIDER SYSTEM
MAIN SHELF
The TimeProvider main shelf houses the IMC, the IOCs, and the input and output connector modules. The main shelf provides up to 32 outputs or provide a mix of E1/T1 retimed spans up to a maximum of 8 retimer circuits per system. The optional expansion panel provides up to 32 additional outputs, allowing a maximum of 64 protected configurable outputs.
STANDALONE PRS
An integrated GPS option allows the TimeProvider to be a standalone Primary Reference Source that meets GR 2830/G.811 requirements. Utilizing Symmetricom’s BesTime® technology, system outputs are constructed from the optimum characteristics of all synchronization sources.
The antenna can be installed up to 1,000 feet from the main shelf, without amplifiers and using traditional coaxial cables.
NETWORK NTP
Applications today demand accurate timing and time-stamps in order to deliver better QoS and improve network performance.
KEY FEATURES
• Fully Redundant and Protected
– Up to 64 1:1 Protected and Configurable Outputs per System
• Best in Class Clock Performance with BesTime and SmartClock Technologies
• Type II/Stratum 2 and Type I/Stratum 3E Holdover
• Universal Input and Output Cards
• T1/E1/2.048MHz/CC
• NTP Server/Client with MD5 Authentication
• NEBS and CE Compliant
– RoHS Compliant
• E1/T1 Span Line Retiming
• SNMP Management
TimeProvider 1000
TimeProvider 1100