Mag0 pages
The high quality, economic and solid state magnetic inductive
flow sensor for measuring water and aqueous solutions
> Introduction
Mass Flow ONLINE B.V., sells flow measuring and controlling products
through the internet. From the website www.massflow-online.com flow
meters or controllers can be ordered 24 hours a day 7 days a week.
Most products are on stock and will be shipped world wide within
two working days.
> Description
The new MAG-VIEWTM series flow meters offer a high quality,
economic and solid state solution for measuring flow in areas
where flow sensors with moving parts cannot be applied. Its
interference free operation, combined with a long-life cycle and
the wide independence to the inlet and outlet pipes makes
MAG-VIEWTM the perfect solution even in compact machines with
cramped confines. The meter is intended for continuously measuring
of flow rates or for dosing / batching of electrically conductive
liquids with a minimum conductivity of 20 µS/cm.
> MAG-VIEW TM series
The MAG-VIEWTM series operate on magnetic inductive principle.
The measuring pipe is in a magnetic field (B). If an electrically
conductive medium (Q) passes through the measuring pipe and
thus right-angled to the magnetic field, a voltage (U) will be
induced into the medium which is proportional to the average flow
velocity and picked up by the two electrodes.
MAG-VIEWTM flow meters can be supplied in three metal models 1 .. 20
l/min, 2 .. 40 l/min and 10 .. 200 l/min and 4 cost-optimized plastic
models 0,25 .. 5 l/min, 2,5 .. 50l/min, 5 .. 100 l/min and 12,5 .. 250 l/min.
The frequency of the pulse signal and the optional analog output
are proportional to the flow.
> MAG-VIEW TM features
ut ake liquid flows visible by:
M
- Pulse output
- Analog output (4 .. 20 mA, option on metal models only)
- Blinking LED (red/green)
ut o mechanical wear
N
ut o moving parts
N
ut ase of mounting and operation
E
ut ree pipe cross section
F
ut o additional pressure drop
N
ut ast response (< 100 ms)
F
utnsensitive with contaminated liquids
I
utdeal solution for interference free operation combined with
I
a long-life cycle
ut an be used in areas where flow sensors with moving parts
C
cannot be applied
ut ide independence to the inlet and outlet pipes create the
W
advantage to be able to install in compact machines with
cramped confines.
utLightweight and compact design
utSuitable for mobile applications
utSustainable product design:
t - Maintenance free
t - Low power consumption