SD Series0 pages
ECHANICAL SHOC
MECHANICAL SHOCKTESTI G
N
M
SD-SERIES SHOCK MACHINE
In today’sT world products and packaging is required to go through an extensive
amount of testing before reaching the distribution environment. Often, many products
are subjected to a specific test standard that requires the shock test. The L.A.B Shock
Machine is used to conduct such tests, due to its ability to produce drop impacts that are
controlled, reproducible and accurate.
SHOCK WITH CONFIDENCE
TM
The SD-Series of mechanical shock machines are used in the design of rugged products and cost
effective protective shipping packages. The SD-Series produces half-sine, sawtooth, and square
wave pulses meeting military (MIL-SPEC) and industrial (ASTM, ISO, JEDEC) specifications, as well as
other specified test requirements.
TM
SD-SERIES FEATURES
TM
- High Performance Carriage: every SD-Series Shock Test System carriage is a massive, solid aluminum
casting machined to precision flatness. This ensures that the carriage has no resonant frequencies within
the machine’s operating range. Consequently, the resulting shock pulses are clean and do not require
over-filtering.
- Specimens are firmly anchored to the mounting surface, which is equipped with numerous tapped
holes machined to close tolerances. Each hole is strengthened with stainless steel inserts.
- Fail-safe rebound brakes on every system incorporate a fail-safe design requiring no auxiliary air or
electrical services. The brake arrests the carriage after rebound, prevents secondary impacts, and
maintains it in a fail-safe position during the hoisting cycle.
TM
- Full safety guards are standard equipment on all SD-Series machines with power hoists. These
expanded sheet metal safety enclosures surround the hoist mechanism and the carriage falling zone.
Opening the electrically interlocked enclosure door will interrupt hoist operation.
- No special foundation is needed. A solid steel reaction mass is isolated from the floor by heavy-duty
springs and shock absorbers. This unique feature prevents transmission of shock waves created by the
carriage impact, and is standard on all models.
- All SD-Series are manufactured in the USA using the finest materials available.
TM
- Complies with ISTA, ASTM, ISO and other internationally recognized test standards.
TM
SD-Series Operation
Load sample and accelerometer to carriage. Set your desired drop height by adjusting the release
mechanism on the scale. Ensure proper pulse pad is installed and fixed with 2 bolts. Simply turn the
switch on to activate motor driven chain and close the safety door. The chain will lift the carriage until
the release mechanism is reached and the carriage drops. That’s it!
L.A.B. Equipment, Inc., 1549 Ardmore Avenue, Itasca, Illinois 60143, USA Phone: 630.595.4288 Fax: 630.595.5196 www.labequipment.com Rev 032211
"