Round Transvectors0 pages
Q
Air Amplifiers for Vacuum,
Blowoff, Cooling or Conveying
Round Transvectors® use a small amount of filtered compressed air to deliver a large
airflow for a wide range of conveying, ventilation, drying and cooling applications. The
high-flow, bladeless blowers don't require machine guards and are especially useful for
removing metal chips and scrap, ventilating fumes or smoke, and conveying small parts,
pellets, powders and dust. As a vacuum or blowoff device, these air amplifiers are more
compact and less expensive than variable-speed blowers and fans, provide instant on/off performance, and operate at low
noise levels to meet OSHA requirements. Round Transvectors® are easily mounted and, with no moving parts to wear out or
break, are virtually maintenance-free. Used in ducted and unducted applications, Round Transvectors® are available in several
sizes, in both aluminum and stainless steel, and can deliver
flow rates from 32 to 2300 SCFM.
Tranvectors' wide range of applications include
• Convey any material that can be moved in an airflow
including grain, plastic pellets, sawdust, powder,
capsules, metal chips, paper and cloth trim, lint, dust,
small parts, stamping scrap and lead shot.
• Ventilate and exhaust welding, soldering and
machine smoke, auto exhaust, plating tank fumes
and other gases.
• Cool, clean or dry molded parts, castings,
food products, etc.
• Weigh sort pharmaceuticals and other light
materials.
Induced
Air Flow
Compressed Air
y Entrained
Transvectors use the impulse
principle to achieve amplified
airflows. When compressed air
enters the Transvector, it fills a
chamber that has only one exit
path - a 0.002" (0.051 mm) annular
orifice. As the air is forced out of the
orifice, it accelerates and collides
with surrounding air entraining a
great volume of free, ambient air.
The result is a large volume of
output air in return for a small
amount of compressed air.
Significantly smaller and less expensive
than variable-speed blowers or fans
Instant on/off - no moving parts
Airflow and output easily adjusted
No guards or safety hazards
Quiet — meets OSHA noise requirements
Easily mounted, ducted and moved
Outperforms Venturis and ejectors
No electricity, explosion hazard or RF interference
"