SERIES MH60 - Versatile High Voltage Power Supplies0 pages

Sries MH60 VERSATILE HIGH VOLTAGE POWER SUPPLY MODULES FEATURES 60W output power High reliability 24V DC powered Range of outputs available Positive or negative polarity Short circuit & flashover protection Remotely controllable V & I control V & I monitor LED status indication Low ripple EU RoHS Compliant to 2002/95/EC CC marked for EU LV Directive 73/23/EEC DESCRIPTION The Series MH60 is a range of versatile high voltage power supply modules suitable for specification in OEM equipment. Powered from 24V DC, they supply up to 60W output and allow full range control and monitoring of output voltage and current. Custom versions can be produced for specific requirements. SPECIFICATION Output Power: 60W max output power. Output Voltage: 0 to 50kV depending on model. Output Current: 0 to 2mA depending on model. Input Voltage: +24V DC (±10%). Input Current: 4A max. Polarity: Positive or negative to order. Ripple: Less than 0.05% +10V peak to peak. Voltage Regulation: Line: Less than 0.01% for a 10% change in input voltage. Load: Less than 0.01% ±1V no load to full load. Current Regulation: Line: Less than 0.01% for a 10% change in input voltage. Load: Less than 0.01% ±1uA for a 50% voltage change. Voltage Control: 0 to 10V for 0 to 50kV accuracy 0.25% ±10V. Current Control: 0 to 10V for 0 to 1.2mA accuracy 0.25% ±1uA. Monitors: Voltage: 0 to 10V ±0.25% ±5mV for 0 to 50kV. Current: 0 to 10V ±0.25% ±5mV for 0 to 1.2mA. Note: Each monitor has a series output resistor of 1kQ. Temperature Coefficent: 100ppm/°C over operating temperature range. Applies to Voltage Control, Voltage Monitor and Current Monitor. Stability: ±0.1% over an 8 hour period after 30 minutes warm-up. Operating Temperature: 0 to +45°C. Storage Temperature: -20°C to +60°C. www.hitekpower.com