Ready AMR / AMI Software0 pages
Simple yet effective
Meter Reading Software
Most Practical and Economical Solution for Meter Data and Load Profile Reading
READY is the simple yet effective software, which is dedicated
to read, store, and analyze the data of electronic electricity meters
that communicates in IEC62056-21 (formerly known as IEC 1107)
standard. It is designed by our company's software team to be
used with BLUSKY optical probes and industrial communication
devices. A
The software supports current operating systems like Win7,
Win Vista etc. and it comes in English and Turkish Language
options. It is also possible to easily implement different language
option to the system according to the user needs.
READY software is designed in modular format and available
modules are:
♦ Serial Communication Module
♦ Ethernet Communication Module
♦ GPRS Communication Module
♦ Load Profile Module
♦ Settings Module
Modules
READY software designed in a modular format as
ribbon pages that have several advantages such as:
♦ Enabling to extend the software with different
modules
♦ Upgrading to extra modules at any time
♦ Using the system with dedicated modules thus
avoiding extra costs for extra modules
Each module has its own functionality and you
may have one or more modules in your application
depending on your license restrictions.
Red | I_"Ft | fiW.aMil.il H*b.BF*~«lfkT,t.lU |
Ml Ddrt SHU* Wnkfc | ||
s |
NUnUtfcri ItaMMiln UncLnanH
Ifllr'jfllM^W !tll
tnraiiilnai Im
11i an i :r n >M > or,
i ■; s i::; -w
5 r fiiii uii
yipstij.W»i
i - ;ri i1 r " m
i ibniiHrnui
Vtn-SflH7rHI«H JiliTJl 1 IB n **i
5 : E;: W s-u/nu: 11 w
MIL: v:n innw
(waning* lA^Lwnd ^Iv™ C^l™
Serial, ETH and GPRS
Communication Modules
READY software lets you to read the displayed values on
LCD in all type of electricity meters independent from brand
and type that communicates in IEC62056-21 (formerly known
as IEC1107) protocol. To read your meter via:
♦ Optical probe
♦ RS232 port
♦ RS485 port
With a direct communication cable and/or a communication
device, Serial Communication Module should be used. To read
your meter via:
♦ RS/ETH Serial Device Server
♦ RS/Fiber Optic Serial Device Server etc.
Over TCP/IP network, ETH Communication Module should
be used. To read your meter via:
♦ GPRS/EDGE/3G Modem
Over TCP/IP network, GPRS Communication Module should
be used.
Parameters for communicating in Serial Communication like
COM port, initial Baud rate; in ETH and GPRS Communication
like IP address, listening TCP Port, Final Baud Rate can be
entered to the system to start reading the meter. In addition
to that, entered parameters can be stored in the system along
with data like meter location name, serial number for using
the same parameters faster in the future.
All read out data can be shown in graphical interface and
can be saved as text files for re-analyzing in the future. The
data also can be printed in special formats or can be saved
as PDF.
"