L 2011 The genset engine0 pages
12-50 kVA at 1500/1800 min-1 | rpm
The engine with integrated oil cooling system.
These are the characteristics of the 2011 Gen:
2, 3 and 4 cylinder naturally aspirated in-line engines.
4 cylinder model also with turbocharging.
Displacement: 0.78 l/cylinder.
Integrated oil-cooling (engine is delivered complete with cooler).
Acoustically optimized crankcase.
All service points on the same engine side.
Electronic engine governor (option).
Compact design and low weight.
Worldwide service network with over 1,000 locations.
Your benefits:
u Low noise emission, cost savings as no noise
attenuation measures are required.
u Long service intervals: 1,000-hour oil change intervals
and low fuel consumption bring savings in operating costs.
u Low installation costs.
u Excellent load takeover characteristics ensure prompt power supply.
u Combined oil cooling and lubrication prevents corrosion and cavitation.
High reliability and durability together with reduced maintenance
requirement and wear parts.
2011. The Genset Engine.
Dimensions
and weights/integrated cooler
F 2L 2011
Length: mm| inch 645 | 25.2
Width: mm| inch 588 | 22.9
Height: mm| inch 707 | 27.6
Weight: kg | lb 212 | 467
F 3L 2011
Length: mm| inch 756 | 29.5
Width: mm| inch 588 | 22.9
Height : mm| inch 701 | 27.3
Weight kg | lb 254 | 560
F 4L 2011
Length: mm| inch 868 | 33.9
Width: mm| inch 588 | 22.9
Height : mm| inch 722 | 28.2
Weight kg | lb 293 | 646
BF4L 2011
Length: mm| inch 778 | 30.3
Width: mm| inch 531 | 20.7
Height : mm| inch 704 | 27.5
Weight kg | lb 295 | 650