FQSS266-Q Pulsed Laser0 pages
CRYLAS GmbH · Ostendstraße 25 · D-12459 Berlin · Fon +49(0)30 - 5304 2400 · Fax +49(0)30 - 5304 2444 · info@crylas.de · www.crylas.de
FQSS 266-Q
Diode Pumped Passively Q-Switched Solid State Laser
· 266 nm
· Pulsed (£ 1.0 ns)
· Up to 1.5 ìJ
· Up to 5 kHz
· External and Internal
Trigger Mode
· Free Beam
biology . biomedicine . chemistry . analytics
FQSS266-Q1 FQSS266-Q2
Wavelength 266 nm
Pulse Energy > 0.3 ìJ @ 5 kHz > 1.25 ìJ @ 1 kHz
Peak Power > 0.3 kW @ 5 kHz > 1.25 kW @ 1 kHz
Max. Pulse Repetition Rate 5 kHz 2.5 kHz
Pulse Width (FWHM) £ 1.0 ns
Polarization Ratio > 100:1 vertical
Power Stability (%rms, 6 hours) 1) < ± 5 %
Optical Data Laser Classification 4 / IV
Spatial Mode TEM00
Beam Divergence (full angle) < 2.0 mrad
Optical Output Beam Diameter at Output Plane horizontal : 600 ± 150 ìm
vertical : 950 ± 150 ìm
Power Consumption mean (max.) 15 W (40 W) 20 W (70 W)
Operating Voltage (OEM) 12 V DC
Line Voltage (with AC-DC adapter) 90 ... 240 V AC
Electrical Data Marking
RS 232, USB
External Trigger (TTL, rising edge) 1 Hz ... max. repetition rate
Interfaces Interface for TTL-control and power monitor
Warm-up Time < 5 min
Miscellaneous Operating Temperature 18 ... 38°C
STAND ALONE Version (incl. key-switch, heat-sink and manual shutter)
Synchronization Signal Output (rise time < 2 ns)
Options Manual switch to 532 nm
1) after 5 min warm up, temperature variation ± 3 °C and < 3 °C/hour
© January 2011 Rev 2.0, CryLaS GmbH. All rights reserved.
Product specifications are subject to change without notice.