FQCW 266-50/1000 pages
FQCW 266-50/100
Diode Pumped Continuous Wave Solid State Laser
•
•
•
•
•
•
•
266 nm
Continuous Wave
Single Frequency
Low Noise
TEM00
Up to 100 mW
Conduction Cooling
raman • inspection • analytics • DVD mastering
Model
Nominal Output Power
Output Power Adjustability
Wavelength
Linewidth
Coherence Length
Beam Quality Factor M2
Optical Data
Electrical Data
Miscellaneous
Polarization
Beam Diameter
Beam Divergence (full angle)
Beam Pointing Stability 1)
3)
Static Alignment Tolerance
1)
Power Stability (8 h, 1 s average)
Noise (100 kHz - 10 MHz)
Line Voltage
Power Consumption Mean (Max)
Communication Interface
Safety Equipment
Dimensions (control unit)
Weight (control unit)
Dimensions (laser head)
Weight (laser head)
Operating Temperature
Warm-up Time (cold start)
FQCW 266-50
50 mW
5 – 55 mW
FQCW 266-100
100 mW
10 – 110 mW
266 nm
< 300 kHz
> 1000 m
< 1.3
vertical, > 100:1
0.55 mm ± 20 %
< 0.8 mrad
< 3 µrad / K
Position < ± 0.25 mm, Angle < ± 2.5 mrad
< 1 % rms
< 0.5 % rms
90 V - 250 V AC
100 W (200 W)
USB / RS 232
key switch, interlock
363 x 325 x 115 mm
5.3 kg
379 x 270 x 91 mm
17 kg
20 °C to 35 °C non-condensing
< 15 minutes
Notes
1. After 30 minutes warm-up in the temperature range 20 - 35 °C, temperature change < 1 °C/hour.
2. The exit window is equipped with the Manual Window Shifter (MWS) in case of external photo contamination. This laser
system is equipped with the Automatic Crystal Shifter (ACS).
3. Position and angle of static alignment tolerances are specified with regard to laser beam exit.
Rev. 7
Page 1 of 2
CRYLAS GmbH · Ostendstr. 25 · D-12459 Berlin · Fon +49(0)30-53 04 24 00 · Fax +49(0)30-53 04 24 44 · info@crylas.de · www.crylas.de