GCEM4100 Extractive Multi-channel Gas Analyser0 pages
Extractive Flue Gas Analyser
The G-CEM4100 is a hot extractive analyser for
difficult flue gas monitoring applications. It uses
infrared absorption spectroscopy to measure up to
seven pollutant species in a single self-contained unit.
Many conventional extractive systems require the
sampled gas to be cleaned and dried to a very
high standard prior to analysis, invariably resulting
in a high maintenance demand. Such elaborate
pre-conditioning is not required; the G-CEM4100
creates ‘perfect’ duct conditions in a temperature
controlled chamber within a separate free-standing,
air-conditioned cabinet. Process gases are simply
cooled (or heated) then transferred along a heated
sample line, without further conditioning, to be
measured using a CODEL multi-channel analyser
housed in the cabinet.
Increasingly, environmental agencies demand that
continuous emission analysers have the facility to
prove their performance using known concentration
audit gases. The G-CEM4100 provides the facility
to automatically check and control zero using clean,
dry compressed air (or N2). Where independent span
checks are required, bottled gases of known
concentration can be injected directly into the
measurement chamber.
multi-species infrared absorption analyser for
up to seven gas species
extractive system to local analyser with full zero
& span verification using audit gases
real-time normalisation for STP & H2O
ppm, mg/m3 (measured) & mg/Nm3 (normalised)
automatic calibration verification facility and full
range of outputs & alarms
5 years+ data logging via pc software package
remote access for diagnostic checks via modem
full EMC & LVD approvals
Model G-CEM4100
Extractive Flue Gas
Analyser
Product Data Sheet
Total Solutions - Total Confidence
Doc i/d : 040051 Issue : A Rev. : 3 Date : 29/1/09 © 2004 CODEL International Ltd. We reserve the right to modify designs without prior notice.
Measurement Species
Species
SO2
NO2
NO
CO2
CO
HCl
CH4
H2O
Range
50000ppm
6000ppm
6000ppm
30%
6000ppm
2000ppm
6000ppm
30%
Zero/Span
Drift Rate
)
)
)
) 2% span/day
)
)
)
)
Linearity
<2%
Repeatability
<2% span
Response
Time
200sec
Analyser Parameters
011
Sira MC 070116/01
Sulphur Dioxide
Nitrogen Dioxide
Nitric Oxide
Carbon Dioxide
Carbon Monoxide
Hydrogen Chloride
Methane
Water Vapour
CODEL