Dual-climate chamber EXCAL 1400 pages
Joined but independent, these two chambers of Excal 140 "hot cold humid" type enable
window panes or other materials to be tested under two different climatic conditions which
could, eventually, stand for outside and inside atmospheres.
Frequently used to test insulation or building materials, this equipment is also used to check
gasket or assembly tightness.
The central interface can be easily reached by
pulling aside the chambers which are equipped with
casters and handles. When the chambers are fully
open, it can be accessed from both sides and it is at
human height.
SPECIAL
Dual-climate chamber
The central interface is custom-designed to fit tests requirements and
to receive a specific tool-holder. This tool-holder is fixed on the
interface and easily removable, so it can be adapted to the different
tests requirements.
The piloting, ensured by Spirale 3, makes it possible to synchronize or desynchronize
setpoints in time so the required conditions are perfectly controlled. In "Dual-climate" mode,
the piloting, as well as the programming, is assumed by one of the two touch Panel PC. This
function enables the commands and the recordings to be centralized on the same support.
These two chambers being linked only by a network cable, they can
be quickly disconnected and used as classical climatic chamber.
This association can be carried out with other volumes (de 138 à 1800 l)
of the Excal range.
Zone du Bedat - CS 50067 - 33652 St Médard d'Eyrans Cedex- France
www.climats-tec.com
tel. : +33 (0)5 56 20 25 25 - fax : +33 (0)5 56 78 43 97
sales@climats-tec.com