CS299MXL20 pages
CS299MXL2
PNEUMATIC UNDERPINNER
The new CS299MXL2 is designed to meet the needs of every framer
looking for high quality joins and comfort of use, thanks to the adjustable
fences and the new patented retractable Ultra clamps.
FEATURES OF THE CS299MXL2
• Wide joining capacity : 190mm stroke (7’’½)
For mouldings up to 150mm wide (6’’) and 112mm high (4’’ 2/5)
• Ultra Powerful Double-action « push and tighten » rebate clamp
Position one of the moulding pieces up to the guide, then lay the second piece
roughly place. The special action of the clamps draws them accurately and firmly
together. Indeed, the clamps literally bite into the rebate of the 2 pieces of mouldings
to pull and tighten them very strongly against each other. This ensures a high quality
join every time, even on very wide mouldings. This is unique to Cassese.
• New retractable Ultra clamp system
Patented “Ultra” clamp system now retracts into table leaving a flat surface.
Great for handling big frames!
• Patented adjustable fences
Adjusts for « less than perfect » 45 cuts and backs not 9
prevent gaps in the top or bottom of the join.
to bottom, in order to
• Clamping of mouldings activated by foot-pedal
• Wedge firing activated by push button
• Automatic position lock
Carriage is locked in position during insertion of nails allowing for consistent
stacking of nails.
• Built-in extension arms for large frames
• New magnetic XL adjustable top clamp
Quickly adjust hold down height. Just change rubber end for hardwood or softwood.
Now with quick-change magnetic hold-downs.
. Patented self-adjusting back supports
• No tools required to change wedges’ sizes
Uses only genuine Cassese patented cartridge wedges. They are color coded with a
full range of sizes available ( 3, 5, 7, 10, 12, & 15 ) most available in hardwood and
softwood versions. Quality and performance!
• No need to adjust the pressure of the wedge shooting system
When changing between softwood wedges and hardwood wedges
• Minimum service required
• Button to adjust the pressure of the horizontal clamps.
To be used when you replace regular clamps with optional soft rubber clamps or when
you join very softwood moulding.
Included Accessories
Mouldings
Width
5mm-150mm
Height
7mm-112mm
Smallest Internal Frame size
Weight
85mm x 85mm
60 Kg
Length
Z21500
Z1783
Z506
Z6532
Z3078
Optional Accessories
490mm
Width
450mm
Height
Z1791
Z18065
1100mm
Air supply
Z20027
Z1813
Z1814
Z1800
Z1804
Compressed air at
7 bars using 5
litres per cycle
Z3212
CASSESE SARL - 8 rue Denis Papin - Zone Industrielle - 77390 Verneuil l'Etang - France
Tel: + 33 (0) 164 42 49 71/73/74 - Fax: + 33 (0) 1 64 42 58 94 - Web Site : www.cassese.com