C1180 pages

C118

Universal hand-held tachometer for mobile use
Series C118

KEY FEATURES
t Signal Frequency 0 Hz…100 kHz
t Reading /min or /sec or other unit
t 6 digit LCD Display (10 mm)
t Universal Signal Input for all BRAUN
t sensors and wheel pulse transmitters
t 1 Analog Output 0…4 V
t 1 TTL Pulse Output
t RS232 Data Interface (optional)
t Power Supply by battery, cell or mains

BENEFITS
t Fast, flexible and easy handling
t Easy adjustment to the application
t due to mobile use
t Sensors to directly plug-in or
t via flexible extension cable
Tachometer C118 + cable SAK-2m + sensor A1S30P 95

Ideally suited to quickly perform speed checks
The BRAUN C118 hand-held tachometer is used for a quickly performed speed check, and
for longer term studies as well. For inspection and maintenance, to optimize and adjust
drives, at rolls, spindles and other objects. At paper, textile and foil applications.
The C118 tachometer can handle up to 1 million RPM (0 Hz…100 kHz). Its 6 digit LCD
display is reading speed by selectable units /min or /sec or other unit.
The operation mode can be selected by a push-button between straight tachometer
function and use of incorporated programmable computing facilities.
Its signal input is universally designed and fits for BRAUN sensors and wheel pulse
transmitters.
The analog output 0…4 V is short circuit protected with source impedance of 100 ohms.
Its TTL pulse output (5 V) is square wave shaped, with its sequence repeating the input.
The C118 tachometer is fast and easy to handle and due to its mobile use very easy to
adjust to the required application. All sensors can be connected directly via plug-in or via
flexible extension cable.

www.braun-tac