PVC AND WPC (WOOD-PLASTIC) PANEL PRODUCTION LINE0 pages
Offer Sheet
PVC and WPC (Wood-Plastic) Panel Production Line
Illustrative photograph:
The production line for the processing of PVC and WPC materials is chiefly designed at the extrusion of wide panels, such as door
panels, etc.
WPC materials may be produced as solid foam with very low weight of the final product. WPC panels are characteristic for their
high quality, strength, and long life of the final product. Most importantly, WPC panels are resistant to both flame and wear. A WPC
processing production line can produce, for example, door panels; children’s playground blocks; outdoor floors; garden surfaces;
and many other products.
Description
Technical Data
1.
BOCOMATIC extruder machine – twin-screw extruder with
conical screws
2.
a) Feeder – stainless version
3.
b) Drying silo (approx. 2m3)
Control panel
Main AC electromotor: Input: 37 kW; revolution control: 1-36 rpm using a frequency
converter
Screw: 2x Ø132/65mm; working length 1,440 mm (with evacuation) an a tempering
unit with
oil screw heating
Screw and chamber version: Either nitride or bimetallic armour treatment (screws
only)
Tempering zone input: 4 zones x 4.5 kW; total of approx. 18 kW
Input of el. motors of the cooling fans: 4 zones x 0.3 kW; total of approx. 1.2 kW
Input of the head heating zone: from 5 to 9 kW (type based)
a) Supervised with a feed screw
Heating for finishing of pellet drying – input 4 kW (as required)
b) Input - 8 kW; 0.75-1.5 kW fan
Touch control panel shows and controls the line
Tool
Delivered based on customer requirements
4.
Vacuum cooling stainless tank with a cooling calibration tool
5.
Belt towing device
Vacuum pump input 4 (3) kW x 4 sets; water pump input 4 kW x 1 set; vert. input of
el. motor 1.1 kW x 1 set; length approx. 6,000 mm
Electronic control; el. motor with gear box input 4 kW; length approx. 1,800 mm
6.
7.
Cutting device
Discharge and tilting device
Accessories (based on requirements)
Line power and input
Electronic control of fixed length; cut – metal slitting saw, input 2.2 kW
Length approx. 6,000 mm; stainless steel; pneumatic tilting for product discharge
Homogenisation and mixing silo; screw conveyor; etc.
Approx. 200 kg/hr (based on type of material processed); total input approx. 100 kW
Line price
Calculated based on specific line power and set selected
Manufacturer reserves the right to change the versions, descriptions, and power data of individual devices given.
____________________________________________________________________________________________________________
Address: BOCO PARDUBICE machines, s.r.o., Čepí 1, CZ - 533 32 Pardubice
Tel. no.: +420 466 797 011
Fax: +420 466 797 012
E-mail: info@boco.cz
http: // www.boco.cz
"