LOADING
Air heating burners/MJ3 Series0 pages
نسخه متنی
"
"
WAYLER S.A. Ameghino 1877 - (1407) Capital Federal / Argentina Tel./Fax: (0054-11) 4682-9114 - 4683-5233 www.rubcar-borghi.com.ar / wayler@rubcar-borghi.com.ar | ||||
Air Heating Burners MJ3 SERIES | ||||
TECHNICA specifications: | ||||
■ | ||||
Designed for natural gas, LPG, or a combination of both. Օ The design produces short flames that remain close to the plates Maximum flame length (at low gas pressure) 600 mm. Օ Efficient operation with duct air velocities of 30 mts/sec. Low NOx and CO emission as a result of combustion Օ 30,000 Kcal/h to 15,000,000 Kcal/h capacities. Modulation capabilities | ||||
ADVANTAGES Օ Does not require combustion chambers. Designed for stable operation both at high- and low- air-circulation velocities, thus enabling proper operation at any working range, a unique advantage of these systems over any other type of burner. It can provide a broad range of flame modulations at constant air flow, with a minimum rating of 4% at full capacity. Օ Easy to install. These burners are built to operate inside ducts and they require only reduced clearances (low load loss), and are easily fitted to existing or new installations. Consistent temperatures across the whole circulating air volume. Օ Enables process-air re-circulation, thus reaching up to 100% re-circulation. Flames are extremely short and run very close to the screen, even when subject to high circulation speeds with high air flows. Օ 100% combustion without CO emission, the combustion effluent is carbon dioxide (CO2) and water steam (H2O). The system produces only low levels of nitrous oxide (NOX.) | ||||
"Plug" system for existing ducts |