Model HA0 pages
INSERT INSTALLATION TECHNOLOGY
Model HA
Automatic Heat Insert Driver
Model HA
shown without
guard
The SPIROL Model HA Automatic Heat Insert Driver provides an accurate
and consistent method to install virtually any type of Heat/Ultrasonic Style Insert
into thermoplastic assemblies. Considering that as much as 75% of the Inserts
performance is a direct result of how well it was installed, all of the factors
that impact installation must be carefully controlled in order to maximize
performance. SPIROL’s Model HA Automatic Heat Insert Driver has
been designed to eliminate the dependency on the operator to control
the factors of time, temperature and pressure to ensure nearly perfect
flow of the plastic for optimal retention and performance.
With this exceptionally versatile machine, the operator does not need to
physically touch the Insert during the entire installation process. The Inserts are
loaded into a vibratory feeder and advance through the feed tube to the guarded
heating chamber. The operator loads a plastic molded component into the fixture,
and activates the machine by simply touching the dual opto-touch sensors. The
Insert is melted into the component to the preset depth, and the orientation head
retracts so that the operator can safely unload the completed assembly. Considering
that the Insert is already preheated to the proper temperature, the installation time is
much faster than other styles of Insert Drivers.
Design Features/Benefits:
Reliable: t - tEasily adjustable temperature setting with Hi-Low
temperature lock-out for optimal melt and flow of plastic
Safe: t
- tGuarded pinch points and ergonomically-friendly optical
sensor actuation with anti-repeat, anti-tie down feature
Quiet:t
-t Silent operation eliminates the harsh noise associated with
ultrasonic installation methods
Accurate: t -t Micrometer style insertion depth adjustment for precise Insert
positioning in the part
t
-t Pneumatic operation, with pressure regulator and flow
controls to precisely control the insertion force and speed
Versatile: t -t Installs Inserts ranging in sizes from M2 to M8 metric threads
and No. 2 to 3/8” unified threads
t
-t Can be easily configured to accommodate a variety of
applications
Efficient: t -t Automatic Insert feeding and installation for maximum
efficiency
Optional alignment fixtures available.
Model HA
shown with
guard
—
Standard with
all machines
Options such as rotary and
linear part indexing, and
part and Insert sensing
can be added for enhanced
productivity and heightened
quality.