53-45 Portable Moisture Meter DC-2000-BP0 pages
Portable Moisture Meter For Baled Paper Model DC-2000-BP
Portable Moisture Meter for Baled Paper
Auto-Ranging Digital Display reads in the 5 to 25 percent
moisture content range
Microprocessor based with large LCD display for easy reading
Pocket Size and weighs less than one pound
Complete with 9 Volt Battery, Manual and Probe
Optional Calibration Standard
The Model DC-2000-BP is calibrated to test the moisture content in bales of scrap paper materials. This easy to-operate instrument can be used in factories, mills and yards.
The DC-2000-BP operates by means of a circuit that measures DC resistance in the range of 100,000 megohms to .02 megohms.
Using the Electrode Probe, the actual moisture reading occurs across the insulated portion of the probe, which is located
one inch from the tip. Thus the probe can be pushed through a wet surface to give an accurate reading of the moisture below, at any depth or successive depths. The probe 1/4” in diameter and 5 inches long with a rounded tip and is constructed
of stainless steel along with Teflon® and Delrin® plastics for highest quality insulation and freedom from corrosion.
Buying excess moisture means paying paper prices for water. And, if the bales are too wet, they can cause problems during the processing steps to follow. Overall average moisture content is important, but since bales dry on the outer surface first, it is also very important to find moisture pockets that are buried beneath the apparently dry surface. The DC-2000-BP will quickly pay for itself by making quick, simple tests for moisture at selected locations of representative bales.
Order Information:
Model DC-2000-BP (Case not included.): 53-45-00
Testing Machines Inc.
2 Fleetwood Court
Ronkonkoma, NY 11779
Tel: (631) 439-5400
Fax: (631) 439-5420
Info@testingmachines.com
Messmer Instruments
Unit F1 Imperial
Business Estate
West Mill, Gravesend
Kent DA11 0DL UK
Tel:+44 (0) 1474 566488
Fax:+44 (0) 1474 560310
Büchel BV
Fokkerstrat 24,
3905 KV
Veenendaal,
Netherlands
Tel:+33 (0)318 521500
Fax:+33 (0)318 5400358
Lako Tool and
Manufacturing Inc.
7400 Ponderosa Road
Perrysburg, Ohio 43552
Tel: (419) 662-5256
Fax: (419) 662-8225
Lawson Hemphill
1658 G A R Highway
Swansea, MA 02777
Tel: (508) 679-5364
Fax: (508) 679-5396
Information@
lawsonhemphill.com
Adamel Lhomargy SARL
Z.A. de l’Habitat,
Bâtiment 6
Route d’Ozoir, 77680
Roissy en Brie, France
Tel:+33 (0) 1 6440291
Fax:+33 (0) 1 64409211
TMI Canada
P.O. Box 203
Pointe-Claire Dorval
QC, H9R-4N9 CAN
Tel: (514) 426-5855
Fax: (514) 426-1557
www.testingmachines.com www.lakotool.com www.lawsonhemphill.com