عضویت 
ورود اعضا
راهنمای خرید
LOADING
FMod-LEDSEQUENCER LED sequencer & driver0 pages
نسخه متنی
"
"
| Datasheet | ||||
| This standalone device allows the creation of light animations from any LED lighting system. The sequence programming is performed directly and simply thanks to the embedded web page. The interface used is the famous Ethernet standard. Simply connect this device to your local (or public) Ethernet network (via Cross cable, switches). It can be remotely controlled (up to several km). | ||||
| Dimensions 107 x 109 x 60 mm (LxBxH) Power supply DC [10-48V] Max current: Z channels current + 100 mA (max 2.6 A) Configuration interface_ Hardware: Standard Ethernet 10BaseT [RJ45] Protocols: TCP-IP & UDP + message encapsulation Software: Web Server on board, web pages with HTTP and Java LED driver_ Number of channel: 5 Number of LEDs: max 13 per channel LEDs output voltage: max (supply voltage - 2V) LEDs output current (each): 0mA, 10-500 mA + 5 mA | ||||
| Embedded webpage | ||||
| The embedded web page allows for a complete configuration of the sequencer. The sequence's programming consists of various elements (up to 4'000) being executed one after the other. Each sequence can be saved. | ||||
| This command allows for a pause. The length of this pause is indicated in milliseconds. | This command will turn on or turn off a LED output by specifying : The LED channel to update. Օ The desired light's strength. Time allowed to achieve it (time allowed to go from 0 to 100%) | |||
| Where to find more information | ||||
| Please download the user's manual from the following address: http://www.fiveco.ch/section motion/ledsseq/real ledsseq E.htm 150408/1.0 All specifications may change without any notification._ | 1/1 | |||
| Ch. de la Rueyre 116 / 1020 Renens / Switzerland Tel +41 21 6326010 / Fax +41 21 6326011 | 0000© | www.fiveco.ch info@fiveco.ch | ||
