LOADING
FMod-I2CDCMOT DB 48/1.5 I2C Motion control board 48V 1.5A0 pages
نسخه متنی
"
"
Datasheet | |
Low cost and very small control device for brushed DC motors (max 70W continuous) with 32bit PID algorithms for position or speed control using the trapezoidal trajectory profile. All the calculations are done on board, in order to minimize the communication rate with a control/supervising I2C master. Up to 112 devices can be connected to the same I2C bus (data & 5V power) in daisychain configuration. This daughter board (DB), dedicated to production, can easily be plugged to a motherboard without any cables, but through its 20 pins (2.54mm space) connector. | |
Dimensions | |
48 x 35 x 23 mm (LxBxH), four 4 mm holes. | |
Electronic interface | |
Hardware: I2C interface: SDA, SCL Software: Standard I2C protocol, 7+1bit address & multibyte data. | |
Power interface | |
Motor power connector DC [10-48V], max 1.5A. Logic power connector DC [5V], 100mA. | |
Motion control | |
Regulator: 32 bit PID with auto-tuning capability Sampling rate: 20 - 2000 Hz (regulation frequency) Modes: - Brake Mode - Free Mode - Open Loop Mode - Speed Control Mode (with trajectory profile) - Position Control Mode (with trajectory profile) Homing (reference): 6 different homing modes Limits (end strokes): 2 independently powered inputs, configurable behaviour | |
PWM output | |
70 kHz or 35 kHz, 4 quadrants management 1.5A continuous motor output power | |
Current limitation | |
Onboard configuration possible between 0.05 and 1.5 A, thus preventing motor overheating and wear. | |
Limits | |
2 mechanical, optical or hall sensors (5V) can be connected and configured for different purposes such as homing. | |
Encoder | |
5V DC, incremental A+B (max 500 kHz) quadrature encoder compatible. | |
Where to find more information | |
Please download the user's manual from the following address: http://www.fiveco.ch/section motion/support motion E.htm | |
211008/3.1 All specifications may change without any notification. | 1/1 |
Ch. de la Rueyre 116 / 1020 Renens / Switzerland Tel +41 21 6326010 / Fax +41 21 6326011 | www.fiveco.ch info@fiveco.ch |