عضویت 
ورود اعضا
راهنمای خرید
LOADING
FMod-TCP BOX Ethernet to RS232, I/O, A/D and I2C converter0 pages
نسخه متنی
"
"
| Datasheet | ||||||||
| This device is a TCP/IP server which allows system integrators to connect different devices such as home appliances, industrial sensors and industrial control systems directly to the Ethernet network, and to remotely monitor and control those while using standard TCP/IP protocols. A web page can be downloaded onto the module, allowing users to be OS independent. | ||||||||
| Features | ||||||||
| Ethernet | ||||||||
| FMo<I-TCP box | ± | |||||||
| Analog ± 12V or 24V Digital inputs (Can be used for thermocouples, voltage monitoring...) 0-24V high side Digital outputs (Can be used with 220V AC static relays, optocouplers..) 50V static relays (Can be used, to cut valve power supply.) 2 wires I2C serial bus (SDA+SCL) (Allows access to various sensors, flash memory, ICs...) RS232 serial port (with hardware flow control) (Allows interfacing compatible devices like scopes, pumps...) | 16 | < | Analog inputs | |||||
| IP | ARP | |||||||
| 14 | Outputs | |||||||
| < < < < | Relays | Protocol conversion | TCP/UDP | |||||
| 2 | HTTP | |||||||
| I2C | ||||||||
| I | ||||||||
| RS232 | 44 KB | HTML + JAVA | ||||||
| Available protocols | ||||||||
| Ethernet: Based on standard 10BaseT NIC controller. Internet layer: IP & ARP. Transport layer: TCP + UDP & ICMP (ping) (up to 4 simultaneous users in TCP). Application layer: HTTP + JAVA dedicated to simple pages and files saved in flash (44kB). Access to RS232, I2C, I/O, A/D and to configuration registers. | ||||||||
| Software | ||||||||
| A TCP/IP stack is embedded on the device. It can be accessed from any standard Web browser or dedicated application. A PC interface (for Windows OS) and a sample Java Applet are also included. Where to find more information | ||||||||
| Connectors and electrical specifications | ||||||||
| ■ RJ45 connector for Ethernet. ■ DIN 41651 40 pins connector for I/O, relays and I2C bus. ■ 9 pins male DSub connector for RS232. ■ Hartmann ST0802 connector for power supply (between 12 and 32V DC). The power supply is protected against negative and over voltage and against current over 3A. The typical power consumption is 60mA. | ||||||||
| Dimensions | ||||||||
| 120 x 110 x 23 mm (L x B x H) mountable on DIN rails. | ||||||||
| Where to find more information | ||||||||
| Please download the user's manual from the following address: http://www.fiveco.ch/section motion/support motion E.htm 211207/1.2 All specifications may change without any notification._ 1/1 | ||||||||
| Ch. de la Rueyre 116/ 1020 Renens / Switzerland ( l(fW(v1(elcowww.fiveco.ch Tel +41 21 6326010 / Fax +41 21 6326011 , ^ t^ ^ rl 쬄 info@fiveco.ch | ||||||||
