Model 9100/9200 300Vpp Single/Dual Channel Signal Amplifier0 pages

MODELS 9100/9200
300Vp-p Single / Dual Channel
Signal Ampliers
• High voltage output to 300Vp-p (±150V)
• Output current to 150mA (9200: 100mA per channel)
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/μs
• Low distortion
• Low cost
• Custom Conguration of:
Gain
Signal Ground
Model 9100/9200 is a Single/Dual Channel,
2U, half-rack size, bench-top power
amplier designed for signal amplication.
With unprecedented signal purity, Model
9100/9200 amplies signals from DC to
over 500kHz. The unit has a xed gain of
x15 however the same amplier is available
with custom gain and no signal purity or
performance degradation whatsoever.
Solves Common Problems
Model 9100/9200 operates as an amplifying
buffer for signals emitted from waveform,
function, or pulse generators. Most of
these generators produce signals limited to
20Vp-p into high impedance. Model
9100/9200 can convert these voltages to
levels as high as 300Vp-p. The amplier has
a current driving capability of ±150mA (9200:
±100mA per channel) from a 0.1W source.
While the output can drive small capacitive or
inductive loads, for full high speed potential it
is recommended that the load characteristics
should be mainly resistive. Model 9100/9200
can withstand load capacitance and
inductance up to 100pF and 0.5mH without
any performance deterioration
Ground Level
The advanced power amplier is supplied
with oating input and output connectors
allowing otation from ground level up
to 250VDC. The only limitation is that
both the input and output grounds must
connect to the same level. This capability
is extremely important in applications
where the amplifying device must reside on
the same ground level as its source. The
oating capability can be added or removed
using a simple, user-accessible, jumper
connection.
Target Applications
The amplier case was designed to stack
on top or below other Tabor products. It
can also be mounted alongside a Tabor
generator in a standard 19" rack. The
waveform-amplier combo is an ideal
solution for virtually any high-voltage, wide
bandwidth application.
Cost Effective Solution
Model 9100/9200 power amplier is yet
another of Tabor`s cost-effective solutions
for a full range of high voltage applications.