MCC-2-LIN0 pages

CONTROL

ENG

www.phytron.eu/MCC-2lin

MCC-2 LIN
Linear controller for two axes
The MCC-2 LIN, phytron´s freely programmable dual axis stepper motor controller,
is a compact stand-alone unit (CPU, Indexer and power stage) for 2 phase stepper
motors providing up to 1.7 APEAK phase current.
Controllers in the MCC series have many inputs and outputs (digital and analogue) and
encoder inputs for step position monitoring
plus possibilities to connect limit switches all
as standard.
Due to the viariety of available host interfaces

(USB, Ethernet etc.), the MCC can be quickly
and easily integrated into existing applications.
This controller is easy to program and can
operate either directly (remote) via its bus or
stand alone (local) with the program routines
stored within.

Application
As a compact stand-alone device, it convinces expecially in small experimental setups,
machines and equipment, which can be dispensed in a PLC.

Highlights
LabVIEW®
LabVIEW® is a simulation software with
a graphical interface. Use the VIs (Virtual
Instruments) generated by phytron and
integrate them in your LabVIEW® project.
So you can easily control the MCC from your
usual programming environment.
LabVIEW®

Stand-alone
IQ
Stand-alone

Once
programmed
the
MCC-2 LIN can work without
additional PC/controller.

Low Noises
Low Noises

Low noises operation for sensitive applications for medical
and scientific applications.

Edition 2012 July

MiniLog-Comm®
MiniLog-Comm® is phytron‘s communication software running under WINDOWS®
to facilitate programming of the stepper motor controller. It provides quick
and easy generation of sequential
programs.
MiniLog-Comm® software is delivered
free with phytron controllers and offers
additional functions for test mode,
step by step control or single sequence
command execution of a motor move, a
motor status window and even a Motion
Creator.

In Focus
IQ
Stand-alone

Integrated Driver

Digital

Analogue

El. Isolated

Low Noises

• 2 axes stepper motor control unit with
integrated power stages
• Use in EMC-sensitive applications
possible
• Phase currents up to 1.7 APEAK
• Power supply 24 to 48 VDC
• Step resolution 1/1 up to 1/256 step
• Host interfaces: USB, Ethernet, RS 485
or RS 232
• Interfaces:
-

2 encoders
2 analog inputs
8 digital inputs and 8 outputs
4 limit switches
2 redundant designed enable inputs

• Programming in well-tried MiniLog
format, acc. to DIN 66025 or in
LabVIEW®
• LabVIEW® drivers for including the
MCC in your LabVIEW® project
• Remote or local mode