CP160 & CP180 for crawlers0 pages
CP160CR-CP180CR
SITEX
Constant Potential Crawler Units
Deploying the cutting-edge technology of our constant potential
portable X-ray generator into the best X-ray crawler tube ever designed.
UNEQUALED WEIGHT
TO PERFORMANCE RATIO
KEY FEATURES
Without any compromise on the
performance, The CP160CR and CP180CR
are, with an outside diameter of 120 mm,
a length of just 688 mm and a weight of
less than 10 kg, the most compact portable
x-ray generators available on the market
for crawler. Offering an output range from
40 to 160 kV (180 kV for the CP180CR)/
0.5 to 2 mA, this crawler X-ray generator
fits perfectly to inspect pipelines starting
from 6 inches.
7 Lightweight
7 Compact: ∅120 x 688 mm
7 6” Pipe ready
7 Constant Potential
7 Reduced exposure time
7 CPRCU: independent
CONSTANT POTENTIAL
pocketsize Remote Control Unit
The constant potential X-ray output of the
CP160CR and CP180CR generators allows
reducing drastically (an average factor of
2 can be considered) the exposure time to
penetrate an equivalent thickness
7 100% working cycle at 30°C
Exposure chart for CP160CR / CP180CR
(Steel -D=2.0 -FFD=84.15mm (6” pipe) -KODAK AA400)
80kV
100kV
140kV
120kV
160kV
180kV
Exposure Time (mA).sec
100
10
1
0
5
10
15
20
25
30
35
Thickness (mm)
www.icmxray.com/ndt
7
of steel. 22 mm of steel in 25 seconds
for a 6’’ pipe or 28 mm of steel in 10
minutes for a 18” pipe (AA400, D=2) are
results you will achieve with the 160 kV
generator. It means quicker results, lower
power consumption by inspection and by
consequence more controls with the same
battery charge.
LIGHT AND USER-FRIENDLY
REMOTE CONTROL UNIT
ICM crawler generators are equipped with a
complete removable control unit, including
LCD display and keypad. This pocket size
Remote Control Unit, the CPRCU, provides
the operator the necessary user-friendly
interface to program the crawler tube.
As soon as the preheating is completed
and the kVs and mAs are keyed in, the
remote control unit is disconnected and
the crawler is ready to go.