Particulate Monitor: EM 30 LGX0 pages

Analyze, Optimize, Comply

Particulate Monitor
Model EM 30LGX

Features & Benefits
Advanced Induction-Sensing
Ultra Reliable Protected-Probe
n Detect Leaks Before Visible Emissions
n Prevent the Escape of Valuable Powders
n Protect Downstream Equipment
n Superior to Traditional Triboelectric
n
n

Applications
Baghouse Filter Leak Detection
Cartridge Dust Collector Monitoring
n Cyclone Overflow Detection
n
n

Made in USA

Overview
Featuring FilterSense’s virtually maintenance-free particulate flow sensing technology, the EM 30LGX is the process
industries most reliable baghouse monitor, filter leak detector and cyclone overflow detector. It is also easy to operate.
Simply apply power and begin assessing filter condition. For alarm setup the display provides both a logarithmic analog
bar graph and an absolute digital readout. The log scale enables simultaneous observation of baseline readings and high
dynamic peaks caused by filter cleaning cycles which is essential to set alarms. The digital read out in absolute units ensures
correct interpretation of the readings and provides accurate historical comparisons without having to normalize data based
on sensitivity or automatic gain settings. Outputs include dual relays and a 4-20mA for PLC connection.
The EM 30LGX meets EPA MACT leak detection regulations when configured accordingly. For automatic calibration
checks, advanced filter leak analysis/locating systems and particulate CEMs, refer to other FilterSense models.

Principle of Operation
The EM 30LGX employs a field-proven combination of charge induction and protected-probe technologies invented by
FilterSense. As particles flow near and around the probe, a minute current is induced. A DSP processes the signal
into an absolute output relative to particulate flow. A protective layer over the probe works in combination with inductionsensing to ensure reliable operation with conductive particulate, moist powders, corrosive gases and particulate buildup.
Maintenance is minimal and there is no need for an air purge. For durability, the sensors are passive and free of electronics.
For safe, easy access and to facilitate EPA QA checks, the control unit and electronics are remote.

P RODUCT I NF ORM AT I O N

ISO 9001:2000 Certified