FMG Fuse Holder0 pages

FMG Fuse Holder

Full Access Automotive Bolt-In Fuse Holder for the AMG Fuse

holder, the FMG is well suited for demanding environments such as ‘under the
hood’ locations in construction, agriculture, heavy trucking and specialty vehicle
applications.

Power Distribution

The FMG fuse holder accepts industry standard AMG fuses for primary fusing
applications. The FMG is offered with a tough elastomer cover for fuse protection,
yet allows for cable input from various orientations. This fuse holder cover is

Specications

Features
Full access for cables. Can be routed to studs from nearly every direction.

Fuse Holders

Rating: For use with AMG fuses from 100-500A. (see page 77 for AMG fuse)
Temperature Rating: –40°F (–40°C) to 260°F (125°C)
Materials: Black thermoplastic with zinc-plated steel studs; thermoplastic
elastomer cover (available in black or red, in normal or extended length)
Termination: M8 or 5/16-18 threaded studs and hex nuts for fuse mounting
Wire sizes: #8 AWG – 1/0
Torque Rating: 120 in-lbs (13.5N m) max
Mounting Torque Rating: 1/4-20 screws with washers (recommended),
44 in-lbs (5N m) max

Dimensions - mm(in)

62.5
(2.46)
REF.
34.4
(1.35)

Ø6.4
(Ø.25)

101.6
(4.00)
107.4
(4.23)

FMG

20.4
(.80)

19.5
(.77)
(STANDARD
COVER)

24.5
(.96)
(EXTENDED
COVER)

43.9
(1.73)
REF.

121.4
(4.78)

Part Numbering System
Series

Hardware

Cover

1 – M8 studs
2 – 5/16-18 studs
3 - M8x1.25 Stainless studs
4. 5/16-18 UNC Stainless studs

F M G

Base

0 – No hardware installed
1 - Nuts installed
2 – Nuts bulk
3 - Stainless Nuts & Lockwashers
installed
4 - Stainless Nuts & Lockwashers
shipped bulk

0 – No cover
1 – Cover (black) installed
2 – Cover (black) bulk
4 – Cover (red) installed
5 – Cover (red) bulk
6 – Extended Cover (black) installed
7 – Extended Cover (black) bulk
8 – Extended Cover (red) installed
9 – Extended Cover (red) bulk

–

Cooper Bussmann Transportation Products

51