HCL-LEC-80-W50 pages
Rif.: Sc-HCL-LEC-80W5_en ver 1.03 del 30/10/2009
LED ILLUMINATOR HCL-LEC-80W5
Professional ring pseudoaxial LED illuminator, direct mounting around lens. High
brightness illuminator.
This special lighting is used in all those critical applications where the ambience
light may cause a problem, in fact the light output of this illuminator is
comparable to sunlight, inhibits the effects of the ambience light.
The elastic central support is tested to work with accelerations up to 3G, ideal to be
fitted with cameras on robot wrist.
It can be mounted in two different ways; fixed between the lens and the camera
(thickness 0.8 mm) or via four fixing holes M3.
The two concentric circles can be switched independently.
The 80 LEDs have a high diffusion coefficient and therefore do not produce any
circular or patches typical of standard LEDs.
Each LED is equipped with sink, cooling with natural circulation.
Can be mounted filters of various types, optical projectors, diffusers and other
accessories to achieve different lighting effects.
The external controller can drive the illuminator with variable input voltage or with
fixed 24V voltage.
Fixed voltage mode allows you to choose 7 light intensities.
The controller is designed to maintain constant light intensity at the changes of
temperature of the LED acting automatically on current intensity and voltage.
The dimensions of the regulator are 66 x 50 x 30 mm, can be mounted with 4 M3
holes from the rear side of the base.
Operatine temperature
-10º +40º
Number and types of LED 80 led with diffused cap, white led 6500K
Angle Min-Max of LED
30°-90°
Power supplì
24 V
Power consumption
48W strobe mode, 31 W al 20% of duty cicle, 27W al 50%, 21W al 100%
Brightness and operating strobe mode max 100 mS duty cicle 5% 33000 LUX , 1485 lumen
cycles
duty cicle 20% max 5 sec, 24000 LUX a 200 mm, 1080 lumen
duty cicle 50% max 20 sec, 21000 LUX a 200 mm, 945 lumen
continuous 18000 LUX a 200 mm, 810 lumen
Optimal distance
100 – 2000 mm
Life (h)
50000 h (10000 h with ambience temperature > 35º)
Dimensions
112 X 112 X h 29 mm
First hole diameter
26 mm (C-mount thickness 0,8 mm)
Second hole diameter
55 mm
Weight
190 g
DANGER: the illuminator produces light with an intensity that would be
dangerous for the eyes.
The lighting is designed to work with temperature up to 80 º. There is a risk of
burns of 2nd grade.
The plastic case allows a thermal insulation of the hot parts of the illuminators, but
the metal components (aluminum heatsink and screw) and LEDs can reach high
temperatures.
DON’T COWER THE ILLUMINATOR, NATURAL AIR FLOW IS
REQUIRED
Specifications are subject to change without notice.
-1-
"