LFX2 Series0 pages

Flat-Dome Lights

LFX2 Series

High Output, uniform diffused light

Reproduce the effects of both coaxial and dome illumination.

Unique lighting technology achieves uniform
omni directional diffused light
The special dotted-pattern reproduces the characteristics of a
coaxial light or a dome light.
Dot printing on the surface
of light diffusion plate

LFX2-100SW

High output, uniform diffused light
The high output enables use with high-speed cameras. There
is more than enough illumination for imaging at a shutter
speed of 1/4,000.
Previous Model(LFX-100RD)

LFX2-100RD

The output of the previous
model was too low for some
applications.

With the LFX2, the output is
sufficient for proper imaging
at a shutter speed of 1/4,000.

(Image)
Camera side

Surface protection plate

light diffusion plate

Wavelengths from Visible Light to Infrared
Heat dissipation sheet

Aluminum housing

Use these lights for a wide range of applications from visible
light to invisible infrared light. The peak wavelength for
Infrared lights is 850 nm.
Red Light

Illumination side

Infrared Light

The printed pattern is still
visible, making it difficult to
see the surface condition.

The printed pattern is
completely eliminated so that
the surface condition can be
easily inspected.

* Under certain conditions dots may be focused by lens or produce an interference pattern with reflections
from some highly reflective surfaces. These effects are not defects and testing should be done to ensure this light is
appropriate for your application.

The LFX2 Series is a completely new type of light product enabled
by CCS's cutting research and development capabilities. The
pattern of dots on the surface of the light diffusion plate controls
light diffusion and transmission making uniform, omnidirectional light possible.

Illumination structure of LFX2-100

Examples of Flat-Dome Light Images

The dot pattern on the surface of the light diffusion
plate controls illumination diffusion and transmission.
The result is uniformly diffused light over the
workpiece. The high output also enables the use of
high-speed cameras.

Application Examples in Packaging

Application Examples in Food Industry

Application Examples in Pharmaceuticals

The products are uniformly lighted without
showing the printed pattern on the packages.

Light is transmitted though tea leaves to
detect only foreign objects.

The surface is uniformly lighted to inspect
the edge or overlap of transparent film.

Light used: LFX2-200RD

Light used: LFX2-200IR850

Light used: LFX2-200RD

Camera

On-chip LEDs
This model
Object

37