عضویت 
ورود اعضا
راهنمای خرید
BOCOMATIC EB 400 pages
BOCOMATICy extrud e r
EB 40
laborator
extruding machine for rubber mixture
The BOCOMATIC EB 40 laboratory extruder with type designation EB/N-40/14-4/33 is an extruding
machine intended for specific or experimental production for detection of material defects or contingent impurities in the undercured rubber mixture. The output mixture output is reduced through a
extrusion head in the form of desired profiles (e.g. strips with dimensions 50x0,8 mm etc. according to
customers requirement). The extrusion head is equipped with air cooling.
The principle of the extruder is a closed steel supporting frame with storage area which is possible
to close. In the frame are placed electric and control case equipped with NORD/OMRON electric components with OMRON (PDI) digital thermoregulators, NORD
gearbox with an axial bearing
housing, main NORD (3x380V/
50Hz) three phase asynchronous electric motor with stepless rpm regulation, controlled
by NORD frequency converter
with external cooling. The
screw is delivered in two versions – not tempered (without drilled aperture) and tempered (with aperture, bored in
its whole length) intended for
cooling by water. It is possible,
on customers request, to fur
