Camera Interface Module and Illumination Controller0 pages

Camera Interface Module and
Illumination Controller

The VisionGauge® Camera Interface Module and Illumination Controller can be used either in conjunction with any of the
Sony Smart Cameras or as a “stand alone” illumination controller.
When used in conjunction with any of the Sony Smart Cameras, the VisionGauge® Camera Interface Module and
Illumination Controller:
•
•
•

Powers the camera
Breaks out all of the camera’s I/O and Serial signals
Controls the illumination

When used as a “stand alone” illumination controller, the VisionGauge® Camera Interface Module and Illumination
Controller can be used to:
•
•

Manually control the illumination intensity (using a trim pot)
Control the illumination intensity via a computer’s output (0-5V).

The VisionGauge® Camera Interface Module and Illumination Controller is compatible with 24V continuous LED illuminators
and uses an industry-standard 9-pin “D” connector (i.e. “DB-9 female” on the controller).
The VisionGauge® Camera Interface Module and Illumination Controller includes the required 24V power supply and is
available as either an enclosed or a board-level product.

Distributed By:
Developed By:
VISIONx Inc.
274 Lakeshore
Pointe-Claire, QC
Canada H9S 4K9

Tel: (514) 694-9290
Fax: (514) 694-9488
Email: info@visionxinc.com
Web: www.visionxinc.com