Conductive Adhesive Tape0 pages
Conductive Adhesive Tapes
Product Overview
Electrically conductive foil tape is manufactured by applying a conductive
adhesive to one or both surfaces of a metal foil such as copper or
aluminium. This is then either self wound or has a separate release liner
applied. This is then slit to standard or custom widths.
Applications
•t Temporary sealing of gaps for EMC testing.
•t PCB shields.
•t Cable shields.
•t Shielded room seams.
Design Considerations
•t Consider if it is a temporary or permanent solution.
•t Galvanic compatibility.
•t Adhesive strength.
Availability
Normally supplied in 33 metre rolls, in standard widths
of 13mm & 25mm. However any width from 8mm up
to approx 200mm, and 50 metre rolls can be supplied to
special order. We can also supply with non-conductive
adhesive or without adhesive if required, to special order.
Production Capabilities
•t Die cutting.
•t Slitting.
•t Laminating.
Materialt
Part No
Example
Copper Tapet
without release liner t
9110
Copper Tape with conductive adhesive for EMI shielding, solderable.t
9115
Copper Tape with conductive adhesive on both sides for EMI shielding. t
9116
Tin-clad Copper Tape with non-conductive adhesive, solderable.t
9510
9515
with conductive adhesive with release linert = t 9115-6
9015
Copper Tape with non-conductive adhesive.t
Tin-clad Copper Tape with conductive adhesive, solderable.t
Tapes can be supplied in two versions – Self Wound,
without a release liner, or with a paper release liner.
Versions having the paper release liner have a suffix
-6 added to the part number.
Aluminium Tape with conductive adhesive for EMI shielding.t
•t Die cut parts
•t Kiss cut parts
= t 9115
Notice
Information supplied in these data sheets is based on independent
and laboratory tests which Kemtron believes to be reliable.
Kemtron has no control over the design of customer’s product which
incorporates Kemtron’s products, therefore it is the responsibility of the
user to determine the suitability for his particular application and we
recommend that the user make his own test to determine suitability.
The product described in this data sheet shall be of standard quality,
however the products are sold without warranty of fitness for
a particular purpose, either expressed or implied, except to the
extent expressly stated on Kemtron’s invoice, quotation or order
acknowledgement. Kemtron does not warrant that products described
in this data sheet will be free of conflict with existing or future patents
of third parties. All risks of lack of fitness, patent infringement and
the like are assumed by the user.
19-21 Finch Drive, Springwood Industrial Estate, Braintree, Essex CM7 2SF, United Kingdom. T +44 (0)1376 348115, F +44 (0)1376 345885, E info@kemtron.co.uk, www.kemtron.co.uk
"