Corma
Vacuum
Forming
Corrugators
Model 430
For pipe sizes:
0.25 inches I.D. to
6.30 inches O.D.
(6 mm I.D. to
160 mm O.D.)

Model 430 illustrated*

Some of the advantages of Corma Corrugators that have made the
Model 430 series a best seller, the world over:
• Corma corrugators feature very strong and precise construction, able to withstand the
rigorous demands of day to day production. All Corma corrugators are backed by a two
year mechanical warranty.
• Corma corrugators are of vertical construction. This design is extremely user friendly and has been
proven for 40 years. The top and bottom housings are held in place by four columns which keep
the machine in perfect alignment. With the centre height adjustment, each Corma corrugator can
make a very large range of pipe sizes; providing production flexibility at lower capital investment.
• Corma corrugators accept almost all blow and vacuum formable materials including PVC, PE, PP,
Nylon, TPR, Teflon and others. Modifiers such as flame retardants, EVA etc. can be added.
• Corma corrugators are available in either blow molding or vacuum forming design.
• Corma corrugators are manufactured under strict ISO 9001-2008 procedures to meet customers’
requirements and bear the CE stamp of conformity to the European technical and safety standard.

10 McCleary Court
Concord (Toronto)
Ontario, Canada
L4K 2Z3
Tel.: (905) 669-9397
Fax: (905) 738-4744
Internet: http://www.corma.com
E-mail: info@corma.com

Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely
small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes
with outside diameters measuring as much as 3000 mm (120 in.).
Corma supplies Single Wall, Double Wall,Triple Wall, Rib Pipe, Ultra Rib, and Corma Solid Wall
Pipe production systems as complete turnkey installations or as individual components.