brochure english0 pages
PRODUCTS & SOLUTIONS
• MULTI-PURPOSE STRUCTURAL BONDING
• BONDING OF TREATED METALS WITHOUT PRIMER
MULTI-PURPOSE STRUCTURAL BONDING
Suitable for bonding small areas and for applying ne bond lines,
adhesives in the ADERIS™ 8041, 8042 and 8043 ranges meet the
requirements for elevated shear stresses. These products have a high
modulus.
Aderis Reference
They adhere to standard thermoplastic materials (with the exception of
polyolens), glass, composites and bare metals.
For bonding to painted or treated metals, we recommend using the
ADERIS™ 8164 and 8264 ranges.
8041
8041S
8042
Open time
3-5 min
1-3 min
23-30 min
6-9 min
6-9 min
Fixture time
8-10 min
4-6 min
40-45 min
12-15 min
9-12 min
100,000 – 160,000
200,000 – 400,000
100,000 – 160,000
100,000 – 160,000
100,000 – 160,000
21-27 MPa
19-24 MPa
21-27 MPa
21-27 MPa
21-27 MPa
13-21 N/mm
13-19 N/mm
13-21 N/mm
13-21 N/mm
15-25 N/mm
15 - 25 %
15 - 25 %
15 - 25 %
15 - 25 %
15 - 35 %
3 mm
10 mm
3 mm
3 mm
10 mm
Viscosity Cp (Brookeld)
Shear strength
Peeling strength
Elongation at break
Max gap lling
8043
8141
BONDING OF TREATED METALS WITHOUT PRIMER
ADERIS™ 8164 and 8264 methacrylate adhesives combine several
innovative technologies patented worldwide.They offer high peel and
shear strengths on a number of treated metals such as galvanized or
electrogalvanized steel, anodized aluminium etc.
These three grades have very low shrinkage with an elongation at
break which is sufcient to avoid placing the bond interfaces under a
high level of stress. These multiple properties also allow for differential
expansion strains in the bonded materials over long sections.
They can also be used for thick joint bonding on other materials such
as metals, composites, glass and thermoplastics.
ADERIS™ products 8164 and 8264 have high impact and vibration
resistance, even in extreme weather conditions.
Aderis Reference
Fixture time
8164
8264
14-19 min
Open time
10-14 min
30-40 min
Viscosity Cp (Brookeld)
Shear strength
21-30 min
150,000 -250,000
400,000 -500,000
18-24 MPa
Peeling strength
Elongation at break
Max gap lling
14-20 MPa
17-25 N/mm
80 - 110%
25 mm
50 mm
Aderis
®
Speciality Adhesives
Data provided as a guide only. For further information and details of our products, refer to the product data sheets which are available on request.