Plate Aerator0 pages

PLATE AERATOR
For the past 25 years an aeration system has been developed for biological wastewater treatment installations, which
combines excellent oxygen transfer efficiency with a long
Features
•
Optimum oxygen input
•
Universally applicable
•
Air tax to 60 m /hr
•
High reliability
•
Homogeneous mixture of active sludge
•
Bottom ribs and the SS 316 Ti
•
Special patented synthetic foil material
realised in reservoiers with a water depth of 4 meters, which
•
Rapid payback
are equipped with thrusters.
•
Standardized dimensions
•
Rental possible
service life.
This can all be realised by use of alternative materials and
use of special production processes.
3
With these plate aerators values of 30gO2 /Nm .m and 5 kg
O 2/kWh can be realised and guaranteed. Thes values are
3
The standard version is suitable for a
In the last 25 years more then 700 installations are equipped
with 50.000 plate aerator.
Traditional membrane tube and dome aerators are made of
rubber. Softeners used in these aerators cause a rapid deterioration of these membranes after 4 to 5 years, resulting in
decreasing performance and efficiency. The special synthetic
used in the plate aerators can, if not overloaded and well
maintained, function satisfactory for a long period of time.
INFORMATION
water depth of 1.1 meters up to 9 meter.
Contact us
Bosman Watermanagement B.V.
Steegjesdijk 6
3265 AE Piershil
P.O. Box 3701
3265 ZG Piershil (The Netherlands)
Phone:
+31 186 60 60 60
Fax:
+31 186 69 13 67
Mail:
info@bosman-water.nl
Website:
ww w.bosman-water.nl