SU1120 pages

"

motion control technologies

nnnn

motion control technologies

nnnn

SU112

nnnn

MultiAxis Controller with included PLC, up to 5 Axis, 48 digital in, 48 digital out, LCD and 40 keys membrane keyboard

nnnn

SU112 is the low cost Axis Controller with included PLC

nnnn

made by Arteco Motion Tech.

nnnn

Minimum configuration: 2 interpolated axis with included

nnnn

sensors, 16 in, 16 out, 2 analog input and 1 serial port

nnnn

RS232/485.

nnnn

Thanks to the slots located in the back side of the multiaxis

nnnn

controller, SU112 can be configurated depending on the user's

nnnn

needs. There are 4 slots available. Each slot can receive the

nnnn

available expansions boards as the 8 digital input + 8 digital

nnnn

output, the 1 axis expansion, 2 axis expansion, the 8 digital

nnnn

input + 8 digital output + canbus port.

nnnn

So, the maximum configuration can reach 5 interpolated axis

nnnn

with included sensors, 32 in, 32 out, 2 analog input, 2 serial

nnnn

ports RS232/485,1 CANbus port to connect the controller to

nnnn

other Axis and I/O expansion modules for distributed I/O and

nnnn

Axis.

nnnn

Each state of the I/O is shown by LEDs located near each

nnnn

terminal block.

nnnn

SU112 provides the 8 rows x 20 characters LCD display with

nnnn

backlight feature. The display and the keyboard can be

nnnn

controlled using the implemented functions and instructions

nnnn

of the PLC.

nnnn

A rich set of graphics and text commands allows the user to

nnnn

make his HMI, 100% according to his needs.

nnnn

SU112 can be programmed using a rich set of Motion Control

nnnn

Functions: Simple positioning, Linear interpolation, Electronic

nnnn

cam, Boolean cam, Optimized trajectories generating starting

nnnn

from a points series, Rotative Axis, Control of Pick and Place

nnnn

machines, Circular interpolation, Self-learning and its

nnnn

execution.

nnnn

Other important features: remote programming like debug,

nnnn

service and upgrade using the low cost WEB interface, built in

nnnn

modbus RTU protocol for connecting the Axis controller to

nnnn

SCADA and other common HMIs.

"